Yes the most efficient way would be to put a t1 between your asterisk system and the sx200 and set up DID & 2Way Trunk lines between the two on those channels.
In asterisk you would set up the dial plan to send 1XX, 2XX, 3XX to the DID trunks and redial the EXTENSION as the DID number on trunks assigned as DID's to the SX200. On the SX200 use the ARS system to use 7 as an access number for the two way trunk group to the astrerisk system, and have it redial out the number, and asterisk would just process the incoming digits as normal. Other than that you could set up analog DID lines for calls into the SX200 from the asterisk system, and just regular analog lines to do the same thing. ---------- From: Chris Mason (Lists)[SMTP:[EMAIL PROTECTED] Reply To: Asterisk Users Mailing List - Non-Commercial Discussion Sent: Friday, May 06, 2005 8:53 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [Asterisk-Users] Mitel SX200 integration I am changing one a resort over from a SX200 with digital phones to Asterisk with Polycom phones. The office can be changed over immediately but the guest's villas can't until we do some rewiring, and that will be villa by villa as they are available. How can I merge Asterisk into the existing installation? For example, I would like to have extensions 7XX be on Asterisk while 1XX, 2XX, and 3XX are on the mitel. Any ideas? Chris Mason NetConcepts (264) 497-5670 Fax: (264) 497-8463 Int: (305) 704-7249 Fax: (815)301-9759 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
