Either its suspending or APM, or watchdog... Check your hardware... Greg
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, May 06, 2005 10:43 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] 7777 (simulate incoming call) not working I don't know if this is related, but the last two mornings I've come in, the newer AAH 1.0 computer has been locked-up. The Caps Lock and Scroll Lock lights on the keyboard are flashing (apparently in a specific pattern). The computer is a HP 7960 w/ ASUS mobo, P4, 1.3Ghz, 256MB RDram. Not being a Linux person, I don't know if this is a Linux issue and/or a hardware issue. Is there a specific log I can look at that might tell me what happened? Thanks, Doug At 03:19 PM 5/5/2005, you wrote: >I'm setting up a new AAH 1.0 box to replace my AAH 0.6 box. Though on >the new box, I've installed a generic ebay X100P. I don't have my >livevoip or voicepulse accounts set up yet on the new box (can both >boxes be registered at the same time?). I've set up one IP phone >(SPA841) with the new box. I have my SBC POTS line plugged into the >fxo card. I set up everything in AMP. I can make out going calls. >The problem I'm having now is the digital receptionist greeting (aa_1). >If I set it to automatically forward to an extension it works. But, if >I have it play a message (press 200 for Joe, etc), you can't here the >message at all. I can dial the extension number and * will accept and >forward me to that extension. I can see on the CLI that it is suppose >to be playing the message. If I dial 7777 (simulate incoming call), I >get the same thing, can't hear voice but can dial extensions. > >I've adjusted the txgain and rxgain in zapata. This only increased >echo. I have googled this list and SF, I can't find anything else to >try yet, or I'm using the wrong search terms. > >Probably unrelated, but when I "stop gracefully" and then restart *, I >get the following error: >[app_zapbarge.so] => (Barge in on Zap channel application) > == Registered application 'ZapBarge' > [app_zapscan.so] => (Scan Zap channels application) > == Registered application 'ZapScan' > [EMAIL PROTECTED] root]# Ouch ... error while writing >audio > data: : Broken pipe > >The only thing I can do at this point is reboot the machine. I don't >see any failures on the boot up. My search for this error appears to >be related to mpg123. But, I never found where somebody had a solution for it. > >I have tried to install fax capability (install-pdf), but that doesn't >work either. I get this error: > >There is a pretty long delay after the "Server: CentOS-3 - Addons" line > >Thanks, >Doug _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
