|
Hi, I’m using a Cisco 7905 (with SIP image CP7905010300SIP050414A)
on Asterisk 1.07. Whenever the user gets voicemail, the MWI goes on,
and when the user listens to the voicemail, the MWI goes off. However, the
phone is configured (as in the default config by Cisco) to re-read its
configuration from tftp every hour. This ‘warm reboot’ also turns
off the MWI, and it won’t turn on again until the user receives a new
voicemail. I watched the sip debug output in *, and noticed that
* indeed does NOT send a new NOTIFY command after the phone reloads the config
(in fact, nothing appears in the debug info). My questions: - Is there a way to make * poll any or all mailboxes
frequently, and re-send notify-commands to the phones? - Is it necessary to reboot the 7905 every x hours,
as in the default config provided by Cisco? - Or is there any other solution to this problem that
I haven’t thought of? From sip.conf: [1002] type=friend host=(phone-ip-address) username=1002 context=testcontext nat=no callgroup=2 pickupgroup=2 [EMAIL PROTECTED] callerid=Loes<1002> |
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
