I would think so as well. I confirmed bidirectional network traffic on
UDP 4569. Unless the encryption uses some other port. I know on IPSEC it
uses protocol 50 & 51 in addition to UDP500. This could be something similar.
I did see something strange in the TCPDUMP. It said "802.d unknown."
I couldn't find anything on the net so it has to be something related since
both servers are behind a firewall. I made sure and ran "init keys" from the
console and restarting with "-i". Nothing seemed to work.
In the meantime I finally got SpanDSP to work correctly.
I added the secrets back and removed the RSA specific config and it started
working again with no problems. It has to be something specific to
encryption traffic for authentication. I have another test server on the
local network I can test with.
Chris
----- Original Message -----
From: "Tim Pushor" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<[email protected]>
Sent: Friday, May 06, 2005 4:26 PM
Subject: Re: [Asterisk-Users] Connecting 2 * Together-Pulling hair out
> I'm sorry Chris, I'm out of ideas. I have that configuration working
> well with multiple boxes, all current CVS (although thats pretty much
> how fwd/iax works, so if that works for you ...)
>
> So far in my limited experience, that message can mean lots of things,
> but in my setup it usually means the remote side is not responding.
>
> > When I make a call it rings about 10 times and then says "All circuits
> > are busy"
> >
> >
> >
> >----- Original Message -----
> >From: "Tim Pushor" <[EMAIL PROTECTED]>
> >To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> ><[email protected]>
> >Sent: Friday, May 06, 2005 3:42 PM
> >Subject: Re: [Asterisk-Users] Connecting 2 * Together-Pulling hair out
> >
> >
> >
> >
> >>Yeah that looks good :( What vers are you running? I'm on a current CVS
> >>HEAD version (from about a week or two ago). I've never seen AMP or know
> >>anything about it.
> >>
> >>Have you tried without the trunk (I use trunk=no). Are they both similar
> >>versions of asterisk? Have you tried capturing and analyzing w/ethereal?
> >>
> >>
> >>Chris wrote:
> >>
> >>
> >>
> >>> I use AMP so the Extensions has the AMP routing. It worked fine with
> >>> the old setup when I used passwords.
> >>>So I didn't think it would be a problem. If you want to see it, I will
> >>>dig it out of the Extensions_additional.conf. I observed bidirectional
> >>>traffic on UDP 4569. IAX2 Debug doesn't show anything on Server B. On
> >>>Server A I see the initial connect, but it doesn't show anything else
> >>>until I disconnect.
> >>>
> >>>a.key, a.pub, b.pub located in /var/lib/asterisk/keys
> >>>
> >>>Server A IAX.CONF
> >>>------------
> >>>[a-peer]
> >>>username=b-user
> >>>type=peer
> >>>trunk=yes
> >>>outkey=b
> >>>host=Host.IP
> >>>auth=rsa
> >>>
> >>>[a-user]
> >>>username=a-user
> >>>type=user
> >>>inkeys=a
> >>>host=host.ip
> >>>context=from-internal
> >>>auth=rsa
> >>>
> >>>----------------------------------------------
> >>>
> >>>b.key, b.pub, a.pub located in /var/lib/asterisk/keys
> >>>Server B IAX.CONF
> >>>--------------
> >>>[b-peer]
> >>>username=a-user
> >>>type=peer
> >>>trunk=yes
> >>>outkey=a
> >>>host=IP ADDR
> >>>auth=rsa
> >>>
> >>>[b-user]
> >>>username=b-user
> >>>type=user
> >>>inkeys=b
> >>>host=IP Addr
> >>>context=from-internal
> >>>auth=rsa
> >>>
> >>>
> >>>
> >>>----- Original Message -----
> >>>From: "Tim Pushor" <[EMAIL PROTECTED]>
> >>>To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> >>><[email protected]>
> >>>Sent: Friday, May 06, 2005 2:21 PM
> >>>Subject: Re: [Asterisk-Users] Connecting 2 * Together-Pulling hair out
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>>Authentication problems should be displayed. I don't use passwords (the
> >>>>-n flag to astgenkey). The name of the key needs to be whatever you put
> >>>>in inkeys.
> >>>>
> >>>>Did you try using the configuration from my original email verbatim? How
> >>>>about showing us the relavent portions of the iax.conf and dialplan, as
> >>>>well as details as to where you put your keys, both private and public.
> >>>>
> >>>>
> >>>>Chris wrote:
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>> I have. The receiving box doesn't show anything, but tcpdump shows
> >>>>> bidirectional traffic.
> >>>>>I can only think that it is an authentication problem. When you
> >>>>>generate the key do you need the password? Does the name of the key
> >>>>>have to match the user name?
> >>>>>
> >>>>>Chris
> >>>>>
> >>>>>----- Original Message -----
> >>>>>From: "Tim Pushor" <[EMAIL PROTECTED]>
> >>>>>To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> >>>>><[email protected]>
> >>>>>Sent: Friday, May 06, 2005 12:33 PM
> >>>>>Subject: Re: [Asterisk-Users] Connecting 2 * Together-Pulling hair out
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>>What does your log/debug tell you?
> >>>>>>
> >>>>>>Set debug and log levels up, and watch the fun.
> >>>>>>
> >>>>>>Chris wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> I tried it that way, but it just rings and eventually says all
> >>>>>>> circuits are busy.
> >>>>>>>
> >>>>>>>
> >>>>>>>Chris
> >>>>>>>
> >>>>>>>----- Original Message -----
> >>>>>>>From: "Tim Pushor" <[EMAIL PROTECTED]>
> >>>>>>>To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> >>>>>>><[email protected]>
> >>>>>>>Sent: Thursday, May 05, 2005 4:06 PM
> >>>>>>>Subject: Re: [Asterisk-Users] Connecting 2 * Together-Pulling hair out
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>>Personally, if I owned both boxes and had full control of the
> >>>>>>>>dialplan
> >>>>>>>>on both, I'd stay away from passwords. (but be careful what I say,
> >>>>>>>>I'm a
> >>>>>>>>hack)
> >>>>>>>>
> >>>>>>>>I have a bunch of boxes connected together via IAX and authenticating
> >>>>>>>>via RSA. The entries in iax.conf are simple, and dialing across the
> >>>>>>>>connection is simple (no passwords in the dialplan) (thanks again
> >>>>>>>>Rich
> >>>>>>>>for taking the time).
> >>>>>>>>
> >>>>>>>>Tim
> >>>>>>>>
> >>>>>>>>Here is a sample of iax.conf entries on machine a:
> >>>>>>>>
> >>>>>>>>[machineb]
> >>>>>>>>type=user
> >>>>>>>>host=machineb.internal.net
> >>>>>>>>auth=rsa
> >>>>>>>>inkeys=machineb
> >>>>>>>>username=machineb
> >>>>>>>>context=inbound
> >>>>>>>>
> >>>>>>>>[machineb]
> >>>>>>>>type=peer
> >>>>>>>>host=machineb.internal.net
> >>>>>>>>auth=rsa
> >>>>>>>>outkey=machinea
> >>>>>>>>username=machinea
> >>>>>>>>
> >>>>>>>>And an example dialplan entry to dial an extention on machineb (in
> >>>>>>>>the
> >>>>>>>>inbound context):
> >>>>>>>>
> >>>>>>>>exten => 333,1,Dial(IAX2/machineb/333)
> >>>>>>>>
> >>>>>>>>And on machinea, the opposite of machineb:
> >>>>>>>>
> >>>>>>>>[machinea]
> >>>>>>>>type=user
> >>>>>>>>host=machinea.internal.net
> >>>>>>>>auth=rsa
> >>>>>>>>inkeys=machinea
> >>>>>>>>username=machinea
> >>>>>>>>context=inbound
> >>>>>>>>
> >>>>>>>>[machinea]
> >>>>>>>>type=peer
> >>>>>>>>host=machinea.internal.net
> >>>>>>>>auth=rsa
> >>>>>>>>outkey=machineb
> >>>>>>>>username=machineb
> >>>>>>>>
> >>>>>>>>To generate the keys:
> >>>>>>>>
> >>>>>>>>on machinea:
> >>>>>>>>
> >>>>>>>>astgenkey -n machinea
> >>>>>>>>mv machinea.* /var/lib/asterisk/keys
> >>>>>>>>
> >>>>>>>>copy machinea.pub to machineb's /var/lib/asterisk/keys
> >>>>>>>>
> >>>>>>>>on machineb:
> >>>>>>>>
> >>>>>>>>astgenkey -n machineb
> >>>>>>>>mv machineb.* /var/lib/asterisk/keys
> >>>>>>>>
> >>>>>>>>copy machineb.pub to machinea's /var/lib/asterisk/keys
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>Chris wrote:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>I have something similar. Both of my servers are behind a firewall
> >>>>>>>>>and NAT. You will need to allow UDP 4569 through the firewall for
> >>>>>>>>>IAX2. If you have NAT you will need to redirect 4569 to the internal
> >>>>>>>>>server.
> >>>>>>>>>
> >>>>>>>>>I would suggest using AMP and then looking at IAX_ADDITIONAL.CONF to
> >>>>>>>>>see how it's done. You can modify the IAX.CONf because I don't
> >>>>>>>>>believe AMP rewrites that file.
> >>>>>>>>>
> >>>>>>>>>I think the user and passwords are required. I would suggest using
> >>>>>>>>>a strong password or someone may decide to make a few phone calls.
> >>>>>>>>>After this you will need the routing in Extensions.conf to allow
> >>>>>>>>>calls to be made on this trunk.
> >>>>>>>>>
> >>>>>>>>>Asterisk will handle the SIP > IAX. All my clients are SIP and
> >>>>>>>>>they have no trouble going over a IAX trunk to other SIP devices on
> >>>>>>>>>the other server.
> >>>>>>>>>
> >>>>>>>>>This is what my IAX_ADDITIONAL.CONF looks like
> >>>>>>>>>
> >>>>>>>>>SiteA - Dynamic IP
> >>>>>>>>>--------------
> >>>>>>>>>[boxb-peer]
> >>>>>>>>>username=boxa-user
> >>>>>>>>>type=peer
> >>>>>>>>>trunk=yes
> >>>>>>>>>secret=mypassword
> >>>>>>>>>host=thehost.dyndns.org
> >>>>>>>>>
> >>>>>>>>>[boxb-user]
> >>>>>>>>>type=user
> >>>>>>>>>secret=mypassword2
> >>>>>>>>>host=thehost.dyndns.org
> >>>>>>>>>context=from-internal
> >>>>>>>>>
> >>>>>>>>>---------------
> >>>>>>>>>Site b - Static IP
> >>>>>>>>>----------------
> >>>>>>>>>
> >>>>>>>>>[boxa-peer]
> >>>>>>>>>username=boxb-user
> >>>>>>>>>type=peer
> >>>>>>>>>trunk=yes
> >>>>>>>>>secret=mypassword2
> >>>>>>>>>host=xxx.xxx.xxx.xxx
> >>>>>>>>>
> >>>>>>>>>[boxa-user]
> >>>>>>>>>type=user
> >>>>>>>>>secret=mypassword
> >>>>>>>>>host=xxx.xxx.xxx.xxx
> >>>>>>>>>context=from-internal
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>Regards,
> >>>>>>>>>
> >>>>>>>>>Chris
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>----- Original Message -----
> >>>>>>>>>From: "mr. barker" <[EMAIL PROTECTED]>
> >>>>>>>>>To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
> >>>>>>>>><[email protected]>
> >>>>>>>>>Sent: Thursday, May 05, 2005 1:58 PM
> >>>>>>>>>Subject: RE: [Asterisk-Users] Connecting 2 * Together-Pulling hair
> >>>>>>>>>out
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>>Yes trying to connect to boxes together.
> >>>>>>>>>>
> >>>>>>>>>>One sits outside the internal firewall and is on the inside.
> >>>>>>>>>>
> >>>>>>>>>>I am using AMP. However I can just put whatever I need in the
> >>>>>>>>>>custom.conf
> >>>>>>>>>>sections.
> >>>>>>>>>>The users agents are SIP .. can SIP call go over a IAX trunk ? if
> >>>>>>>>>>so great.
> >>>>>>>>>>To create the trunk do I need to use a users name and password ? or
> >>>>>>>>>>?
> >>>>>>>>>>
> >>>>>>>>>>I need to have the *box that is behind the firewall to be able to
> >>>>>>>>>>place a
> >>>>>>>>>>call out through the *box that has a public ip.
> >>>>>>>>>>
> >>>>>>>>>>Thank you
> >>>>>>>>>>
> >>>>>>>>>>-----Original Message-----
> >>>>>>>>>>From: [EMAIL PROTECTED]
> >>>>>>>>>>[mailto:[EMAIL PROTECTED] On Behalf Of Chris
> >>>>>>>>>>Sent: Thursday, May 05, 2005 8:20 AM
> >>>>>>>>>>To: Asterisk Users Mailing List - Non-Commercial Discussion
> >>>>>>>>>>Subject: Re: [Asterisk-Users] Connecting 2 * Together-Pulling hair
> >>>>>>>>>>out
> >>>>>>>>>>
> >>>>>>>>>>I am not sure what you are trying to do. I have created an IAX2
> >>>>>>>>>>trunk
> >>>>>>>>>>between the servers over an internet connection.
> >>>>>>>>>>Then all you have to do is put in call routing on the trunks to
> >>>>>>>>>>forward the
> >>>>>>>>>>call to the right place. Are you using AMP or trying to do it
> >>>>>>>>>>manually.
> >>>>>>>>>>I found everything a little confusing as well, but it is simple now
> >>>>>>>>>>that I
> >>>>>>>>>>understand it.
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>Chris
> >>>>>>>>>>
> >>>>>>>>>>----- Original Message -----
> >>>>>>>>>>From: "mr. barker" <[EMAIL PROTECTED]>
> >>>>>>>>>>To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
> >>>>>>>>>><[email protected]>
> >>>>>>>>>>Sent: Thursday, May 05, 2005 4:43 AM
> >>>>>>>>>>Subject: [Asterisk-Users] Connecting 2 * Together-Pulling hair out
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>_____
> >>>>>>>>>>>
> >>>>>>>>>>>Subject: [Asterisk-Users] Connecting 2 * Together-Pulling hair out
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>I have read the docs on connecting 2* together but am unsure of a
> >>>>>>>>>>>few
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>things
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>Do I need a different account for each number that will be called
> >>>>>>>>>>>from one
> >>>>>>>>>>>box to the other ? ie. Do I set up a user account on one and then
> >>>>>>>>>>>have the
> >>>>>>>>>>>other box log into that account when it whats to make a call ?
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>I have 2 asterisk boxes and only one of them has the ability to
> >>>>>>>>>>>access a
> >>>>>>>>>>>VoipAccount and PSTN connections.(*box 1). The other holds the SIP
> >>>>>>>>>>>extensions for the internal SIP users/exten(*box2)
> >>>>>>>>>>>
> >>>>>>>>>>>I would like to be able to have the box with the Sip UA(*box2) on
> >>>>>>>>>>>it to be
> >>>>>>>>>>>able to place a call using the box that has the VoipAccount and
> >>>>>>>>>>>PSTN
> >>>>>>>>>>>connection. I am able to make multiple UA calls on the
> >>>>>>>>>>>VoipAccount and 3
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>on
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>the PSTN lines (only have 3 lines coming in). I can get it to
> >>>>>>>>>>>work if I
> >>>>>>>>>>>create a user exten on *box1 and map a trunk(which is really only
> >>>>>>>>>>>an
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>exten)
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>using the user/password login to that exten from *box2. However
> >>>>>>>>>>>when I
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>try
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>to place a second call when the VOIP line is in use it gives me
> >>>>>>>>>>>error (
> >>>>>>>>>>>basically saying can't use the trunk because it is in use) I
> >>>>>>>>>>>would like
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>to
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>be able to have this exten/trunk to be able to use multiple
> >>>>>>>>>>>connections on
> >>>>>>>>>>>it.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>There must be an easier way to do this I am just not sure how. I
> >>>>>>>>>>>looked
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>at
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>creating IAX trunks but still come up with the Trunk is really an
> >>>>>>>>>>>Exten
> >>>>>>>>>>>name/password .
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>Any help would be appreciated. (my brain is boiling eggs)
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>Thank you.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>----------------------------------------------------------------------------
> >>>>>>>>>>----
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>>_______________________________________________
> >>>>>>>>>>>Asterisk-Users mailing list
> >>>>>>>>>>>[email protected]
> >>>>>>>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>>>>>>To UNSUBSCRIBE or update options visit:
> >>>>>>>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>_______________________________________________
> >>>>>>>>>>Asterisk-Users mailing list
> >>>>>>>>>>[email protected]
> >>>>>>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>>>>>To UNSUBSCRIBE or update options visit:
> >>>>>>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>>>>>
> >>>>>>>>>>------------------------------------------------------------------------
> >>>>>>>>>>
> >>>>>>>>>>_______________________________________________
> >>>>>>>>>>Asterisk-Users mailing list
> >>>>>>>>>>[email protected]
> >>>>>>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>>>>>To UNSUBSCRIBE or update options visit:
> >>>>>>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>_______________________________________________
> >>>>>>>>Asterisk-Users mailing list
> >>>>>>>>[email protected]
> >>>>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>>>To UNSUBSCRIBE or update options visit:
> >>>>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>>>
> >>>>>>>>------------------------------------------------------------------------
> >>>>>>>>
> >>>>>>>>_______________________________________________
> >>>>>>>>Asterisk-Users mailing list
> >>>>>>>>[email protected]
> >>>>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>>>To UNSUBSCRIBE or update options visit:
> >>>>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>_______________________________________________
> >>>>>>Asterisk-Users mailing list
> >>>>>>[email protected]
> >>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>To UNSUBSCRIBE or update options visit:
> >>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>
> >>>>>>------------------------------------------------------------------------
> >>>>>>
> >>>>>>_______________________________________________
> >>>>>>Asterisk-Users mailing list
> >>>>>>[email protected]
> >>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>To UNSUBSCRIBE or update options visit:
> >>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>_______________________________________________
> >>>>Asterisk-Users mailing list
> >>>>[email protected]
> >>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>To UNSUBSCRIBE or update options visit:
> >>>> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>
> >>>>------------------------------------------------------------------------
> >>>>
> >>>>_______________________________________________
> >>>>Asterisk-Users mailing list
> >>>>[email protected]
> >>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>To UNSUBSCRIBE or update options visit:
> >>>> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>
> >>>>
> >>>>
> >>_______________________________________________
> >>Asterisk-Users mailing list
> >>[email protected]
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>To UNSUBSCRIBE or update options visit:
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>------------------------------------------------------------------------
> >>
> >>_______________________________________________
> >>Asterisk-Users mailing list
> >>[email protected]
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>To UNSUBSCRIBE or update options visit:
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> _______________________________________________
> Asterisk-Users mailing list
> [email protected]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
