Sure... except that the second call *would* be to extension "h" and not to the same number. Haven't observed that behavior in real life, though. Have you?
Secondly, in my setup, we're using the proper 10 and 7-digit and 011X patterns. However, this was a suggestion for a German PRI, and all bets are off for that, as German numbers don't follow very specific rules. > -----Original Message----- > From: Eric Wieling aka ManxPower [mailto:[EMAIL PROTECTED] > Sent: Saturday, May 07, 2005 4:17 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Transparently Routing German > pri through Asterisk > > > Jay Milk wrote: > > You got your groups mixed up. Should be: > > > > [default] > > exten => _.,1,Dial(ZAP/g2/${EXTEN}) > > > > [outgoing] > > exten => _.,1,Dial(ZAP/g1/${EXTEN}) > > > > Means that anything coming in to channel-group 1 (default context) > > will be sent out through group 2, and vice versa. > > Watch the console and be amazed when _. matches extension > "h", which is > called when the far side of the call hangs up. You get two > calls to the > same number by only dialing once! Stop being lazy and at > least use _X. > as your pattern. _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/aster> isk-users > To > UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
