Hi, > -----Original Message----- > I tried it first with the bristuff drivers from Junghanns. > The BRI card > worked fine alone, but as soon as I load the zaptel driver for the > TE110P the BRI card says, that the port is down.
> Is there any stable way, or as someone experience with this > two cards in one > box? Yes it can be done (at least with 'real' Junghanns QuadBRI cards, I don't know about the BN card, but I suppose it should work). One thing to note is the way in which modules are loaded. Make sure you don't use modprobe in this scenario, but insmod. This is because with modprobe ztcfg is run after loading the first driver module. This can cause some problems. So insmod all modules, then run ztcfg manually (or from your own script). Florian _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
