On Tuesday 10 May 2005 9:45 am, David Masure wrote: > Hi folks ! > > I bought two sipura 841 phones. I used to have GN Netcom headset which > I connect instead of the handset. The problem is that I don't have any > sound coming out the headset and I can't speak neither ! > ... > > Or....can anyone advise me on headset working with the sipura 841 ?
I just use a standard 2.5mm headset that plugs into the small port on the right side of the phone about 1.5" below the screen. The 2.5mm size plug is standard for cell phone headsets and cordless phone headsets, at least here in the USA - dont know about france. The 2.5mm headset works fine on the 10+ SPA-841's that I've used it on (several managers use headsets in my office with the SPA-841.) -josiah -- Josiah Bryan -------------- I too use a number of SPA-841 with the headsets plugged into the 2.5mm headset port. I found the best headset to be the Panasonic TCA92 (off eBay) at about $usd8 +usd8 postage to Au. Some of the other headsets I tried, did not perform as well. However I have found the later firmware (v3.1.2) has a problem with background noise causing the incoming audio to mute on both headset and speaker phone. You can reduce the microphone level in this latest software, but this didn't help. With the original firmware that came with the phones (V 0.9.1) this does not occur. If anybody has a copy of this earlier firmware, I would love to get hold of it to downgrade a couple of phones as I would prefer to put up with a couple of bugs in this version than crappy headset audio. craig _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
