<< Has anyone seen something like that and is there a fix? A google search didn't turn up any apparent hits.>>
I have seen exactly this problem. Even IVR failed to work. Got an RMA from the supplier and they exchanged with no questions. Bill Seddon -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Prior Sent: May 11, 2005 2:51 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] SIPURA SPA-2000 webserver dead after firmwareupgrade I just got a refurb Sipura SPA-2000 and was able to assign it an IP address with DHCP and ping the device, but then I ran the firmware upgrade utility to bring it up to spa2k-2.0.13g which seemed to work just fine, but after it rebooted I cannot connect to its webserver for configuration. I can still ping the unit. When I use the built in voice menu it reads back the right IP address, webserver port, and claims the webserver is enabled, but I can't connect to port 80 on the device and running the firmware upgrade utility says that it cannot connect to the unit either. Has anyone seen something like that and is there a fix? A google search didn't turn up any apparent hits. Thanks Steve _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
