I had the same problem, there were a couple problems, mostly with my dialplan:
AAH 1.0 Config Trunk Settings Trunk Name: voipjet Outbound Caller ID: "Tech Data Pros" <9495027819> Maximum Channels: 4 Dial Rules: 1949+NXXXXXX ; you need to add local area code Outgoing Settings: Trunkname: voipjet PEER Details: allow= ulaw auth=md5 context=to-voipjet disallow=all host=69.25.60.30 notransfer=yes secret= mysecret type=peer username=myuserid Outbound Routing Settings Route Name: FWDOUT Dial Patterns: 393|. Note: for toll free add the following (You will need to dial * before the toll free number: *1800NXXXXXX *1888NXXXXXX *1877NXXXXXX *1866NXXXXXX Trunk Sequence: 0 IAX2/fwd Save all your settings, click on red bar to apply, wait 5-10 seconds depending on the speed of your machine. Dial 393612 for current time and 393613 for an echo test. Kerry Garrison http://geekgazette.com - http://techdatapros.com IT/VoIP Consultants -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wiley Siler Sent: Friday, May 13, 2005 8:49 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] voipjet anyone? You are completely correct. I see by the called number that the user is in Phoenix? I am too. Call me at 4804230118 ext. 1003 if you want some off list assistance with this. I have mine running just fine with AAH 0.09. Thanks, Wiley -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Adamson Sent: Friday, May 13, 2005 9:24 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] voipjet anyone? Look a little closer... WARNING[2442]: Call rejected by 66.246.220.19: No such context/extension that certainly does not imply an incorrect codec! ------------------------ > Almost positive iLBC is not allowed.... Use uLaw... > > This is directly form the install instructions... > > Step 3A (recommended): Set your codec to G.711 ulaw for optimal sound > clarity and minimal transmission delay. In iax.conf (found in > /etc/asterisk) locate the codec section and include the following only. > > disallow=all ; Prevent all codecs... > allow = ulaw ; ...except G.711 ulaw > > > W > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Kevin > Bockman > Sent: Thursday, May 12, 2005 10:52 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] voipjet anyone? > > > >>May 12 22:27:05 VERBOSE[2442]: -- Executing > > >>[1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", > > >>"[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack May 12 > > >>22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 May 12 > > >>22:27:05 > > > >>WARNING[2442]: Call rejected by 66.246.220.19: No such > > >>context/extension > > > > > >The number needs to be 10 digits. Add a 1 in front. > > > Tried that, doesnt seem to matter. > > Hmm.. did you do an extensions reload? If so, then it should give you > a different error. Show us. > > My iax.conf: > [voipjet] > type=peer > ;host=216.118.117.46 primary east > host=69.25.60.30 > username=<username> > secret=<pass md5> > auth=md5 > context=default > disallow=all > allow=ilbc > jitterbuffer=yes > dropcount=1 > > extensions.conf: > exten => _1NXXNXXXXXX,1,Dial,IAX2/voipjet/${EXTEN},,tTwW > > > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > ---------------End of Original Message----------------- _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
