Are you trying to go right to 7.4? I had to install 6.3 first and then I could install 7.4. Others have had to upgrade in version increments. (ie from 3 to 4 to 5 to 6 to 7)
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Mensel Sent: Friday, May 13, 2005 6:04 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Cisco 7960 Can't be unlocked OK...now that I've been able to get in to the phones, I have (yet another) strange problem: I've configured the phone with a Static IP for testing. TFTP server settings are pointed at a known good TFTP server that other machines on the network are able to access and GET files from. When the phone boots up, it will appear on the network for about 5 pings worth of time, and then dissappear, only to reappear about 20 pings later. The phone's status message indicates a tftp server timeout. My tftp server's logs do not indicate any TFTP activity. The phones are Fw ver 3.1 MF.G2. (SCCP) I'm trying to convert them to SIP (obviously.) Any help will be greatly appreciated. John Mensel On Thursday 12 May 2005 13:06, John Mensel wrote: > Tim, > > Thank you, that took care of the problem -- I'm much obliged. > > John > > On Thursday 12 May 2005 11:51, Timothy R. McKee wrote: > > Those are SCCP based phones. > > > > move the cursor to option 3, but do not press select. press **#, > > then press select. You should see the padlock icon with an unlocked > > appearance. press 32 and see if you have a YES option (alternate TFTP). > > If so press yes, then go to option 8 and edit the ip address. The > > phone sometimes locks itself in the middle and I have to start over. > > > > tim > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of John > > Mensel > > Sent: Thursday, May 12, 2005 12:26 PM > > To: [email protected] > > Subject: [Asterisk-Users] Cisco 7960 Can't be unlocked > > > > Odd problem here--I just got a couple of Cisco 7960s from Ebay that > > are not functioning as expected...... > > > > These 7960s can't seem to be unlocked for manual configuration via > > any mechanism that I can find. If you go to settings, there is no > > option 9 (unlock). Available options stop at 4 (Status). **# has no effect. > > > > The Phones report that thier current firmware version is 3.1 MF.G2. > > > > When plugged into a known good DHCP/TFTP server, the phones will > > *sometimes* get a DHCP lease that is reflected in Settings>>>Network > > Configuration, but at no point will they grab new firmware via TFTP. > > DHCP server logs show the phones trying acquire a lease and then > > immediately requesting a new one. > > > > If anyone has encountered a similar situation, please advise. > > > > Thanks, > > > > John Mensel _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
