On 06:37, Mon 16 May 05, Rich Adamson wrote: > > > > Hi Waldo, it really depends on who you ask - Digium say that anything > > less than 99.99% is going to result in problems, but ours regularly runs > > at around 99.98% and we don't have any problems. > > > > One of our boxes was running at around 99.96% and we had major issues > > with the voice quality packing up from time to time. We disabled hyper > > threading and put the TDM400P on its own IRQ and the results came back > > up over 99.98% (haven't had any problems since). > > How do you disable hyper threading (what's the command and where is it > placed)? > You have to disable it in your server's BIOS. You can also try to install an uniprocessor kernel, but I don't know if that is enough. We had to disable HT too to get it all working the way we want. I think this is an issue with the HT support in kernel 2.4.X -- Michiel van Baak http://lunteren.vanbaak.info [EMAIL PROTECTED] GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x7E0B9A2D
"Two of the most famous products of Berkeley are LSD and BSD. I don't think that this is a coincidence." _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
