|
Hi
there
I have a question regarding IAX
jitter. I have 3 users on a LAN dialing into a Meetme conference on an
Asterisk box which is also hosted on the LAN. I have set jitterbuffer = no
and tos = lowdelay. Now, for 2 of the users the audio is fine, but for the
3rd user there is intermittent break up in the audio when they
are receiving. I have had a look at “iax2 show channels” and for the first 2
users (those with no audio problems), the Jitter is low (0006ms), and the
Lag is relatively high (00070ms). For the 3rd user (the one with
audio breaking up), the Jitter is relatively high (0627ms) and the Lag is
relatively low compared to the others
(00012ms).
All of the users are on the same
LAN, so can’t quite understand the differences.
Any explanations / ideas would
be much welcome.
Thanks
Steven
I'm having the same issue; I'd love to know how to actually diagnose the
issue.
I assume there is somewhere on the voip-info.org wiki about
this?
JD
I'm in the same boat, although I'm only using IAX2 for connectivity to my
provider. The phones themselves are SIP, but some users (really
should be read all users, but at different times) experience bad audio -
described as "cutting-out" from the remote party. My user is
heard correctly by the remote party but the remote party is bad to my
user. Doesn't seem to matter whether it's inbound or
outbound.
Marty
|
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
