Asterisk (or at least Asterisk - Stable) will not present DNIS to the CLI. If the number originally dialled is redirected then you will see the redirected number presented rather than the original one. The original number appears to be present in libpri but doesn't seem to make it into asterisk itself where it can be read. I had some numbers in Adelaide that were diverted to Perth - When someone calls the Adelaide number I don't see the Adelaide number, instead asterisk will only make available to me the Perth number that it has been redirected to.
The original number is still in there somewhere though, cause if I take the call and forward it back out the PRI to a dialogic based system it reports DNIS as the Adelaide number rather than the Perth number. It had me puzzled for a while til I worked it out. Craig ----- Original Message ----- From: "Peter Jenkins" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Tuesday, May 17, 2005 8:43 AM Subject: [Asterisk-Users] CLI and DNIS presented to Analog extension My company is based in Australia and we have a need to be able to present CLI (ANI) and DNIS to an analog extension. Currently our PABX vendor is saying they can only deliver CLI between the first and second cadence. The system will collect calls via an aggregate of ISDN PRI services from the PSTN and then direct them to the analog extensions in a hunt group configuration. It is important that the analog extension be presented with DNIS information as it needs to know who the call was originally intended (another system is connected to the analog extension). I have been told that you can get CLI+DNIS to an analog extension direct from the carrier in the US however this is unfortunately not available in Australia. I am getting some headwind from my organisation about the possible use of Asterisk which is based around the fear of the unknown. If anyone is aware of this configuration being used with Asterisk then I might have a chance of at least getting them to let me test the configuration. Thanks in advance. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
