Hi,
I have read a lot about the thread of faxing support in Asterisk as well as spanDSP. However, either I don't fully understand other people's applications or may be what I'm trying to do is different from what others are trying to do.
I have a very simple setup. I have an asterisk server with a TE110P connected to the PSTN via T1 PRI (Asterisk A). I have another asterisk server with a TDM40B board with 4 FXS ports (Asterisk B) where I have an actual physical fax machine connected to one of these ports. These two machines are in two separate locations connected via a point-to-point T1 circuit. What I wish to do is program a DID on the T1 so that when the call comes into Asterisk A on that DID, it will be routed via IAX2 to Asterisk B, which will in turn patch the call through the FXS port where the fax is connected. Obviously, I also wish to be able to send faxes in a similar opposite direction.
Is this possible with Asterisk? Will it work?
Thanks, Waldo _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
