On Wed, 18 May 2005, Lee Norvall wrote:
> Hi
>
> I have installed 2 x Eicon BRI ISDN cards into a Suse 9.2 server. We can
> use all 4 lines for out going calls fine, but on incoming we can only use 2.
> On calling in using the main msn, the 3rd line gives a an engaged signal.
>
> I have unplugged 1 of the cards, and the other card takes the 2 calls. I
> then swapped this around, and this also works fine. But when using both
> cards, we can only use 2 line in.
There are two possibilities:
1) your Telco doesn't send the 3rd call to your other line.
You can verify that by using
divactrl mlog -c 1 -o (diva_idi module must be leaded)
and see if an incoming call is shown.
(use -c 2 for the second card)
2) your configuration of chan_capi is not correct and the 3rd call is
ignored/rejected.
If you don't use DIVA Server cards with CAPI, forget this mail.
Armin
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
