Try setting defaultip=192.168.44.23
Too -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of barney Sent: Monday, May 23, 2005 4:38 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Getting a Cisco gateway to work with Asterisk I tried that, but it is not working for me with [EMAIL PROTECTED] v1.0 :-( -b > Mark, > > Try writing the sip.conf stanza as: > > [192.168.44.23] > context=from-pstn > host=192.168.44.23 > type=friend > insecure=very > > The 'insecure=very' allows any calls from this IP address to match. > > Alistair Cunningham, > Integrics Ltd, > +44 (0)7870 699 479 > http://integrics.com/ > > > Mark Dutton wrote: >> Thanks Steve >> >> I realised the other day that I don't want the Cisco to register with >> credentials. There is in fact a hidden credentials command in 12.3(8)T. >> >> What I did was take away all registration commands from my sip-ua >> block in the Cisco. >> >> I am using [EMAIL PROTECTED], so I have created a trunk through AMP. I >> have changed the settings in outbound trunk to the following and >> created an empty inbound trunk on the web page with no parameters. >> >> The result is that in Asterisk sip_additional.conf I have this block >> >> [cisco] >> context=from-pstn >> host=192.168.44.23 >> type=friend >> >> Now when I try to call into my gateway from the PSTN, I get the >> following line immediately after the Cisco does an invite >> >> Sip read: INVITE sip:[EMAIL PROTECTED]:5060 SIP/2.0 Via: >> SIP/2.0/UDP 192.168.44.23:5060;branch=z9hG4bK3016D6 From: >> <sip:[EMAIL PROTECTED]>;tag=391004-1A5E To: >> <sip:[EMAIL PROTECTED]> Date: Sun, 22 May 2005 14:29:25 GMT >> Call-ID: [EMAIL PROTECTED] Supported: >> 100rel,timer Min-SE: 1800 Cisco-Guid: >> 3143229573-3389264345-2148466707-2141291050 User-Agent: >> Cisco-SIPGateway/IOS-12.x Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, >> PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO, UPDATE, REGISTER CSeq: >> 101 INVITE Max-Forwards: 15 >> Remote-Party-ID: >> <sip:[EMAIL PROTECTED]>;party=calling;screen=yes;privacy=off >> Timestamp: 1116772165 Contact: <sip:[EMAIL PROTECTED]:5060> >> Expires: 180 Allow-Events: telephone-event Content-Type: >> application/sdp >> Content-Length: 328 v=0 o=CiscoSystemsSIP-GW-UserAgent 23 4058 IN >> IP4 >> 192.168.44.23 s=SIP Call c=IN IP4 192.168.44.23 t=0 0 m=audio 17780 >> RTP/AVP 8 18 98 3 0 19 c=IN IP4 192.168.44.23 a=rtpmap:8 PCMA/8000 >> a=rtpmap:18 G729/8000 a=fmtp:18 annexb=yes a=rtpmap:98 GSM-EFR/8000 >> a=rtpmap:3 GSM/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:19 CN/8000 20 >> headers, >> 14 lines >> Using latest request as basis request Sending to 192.168.44.23 : >> 5060 (non-NAT) Found no matching peer or user for >> '192.168.44.23:57704' >> Found RTP audio format 8 >> Found RTP audio format 18 >> Found RTP audio format 98 >> Found RTP audio format 3 >> Found RTP audio format 0 >> Found RTP audio format 19 >> Peer audio RTP is at port 192.168.44.23:17780 Found description >> format PCMA Found description format G729 Found description format >> GSM-EFR Found description format GSM Found description format PCMU >> Found description format CN >> Capabilities: us - 0x508 (alaw|g729|ilbc), peer - audio=0x10e >> (gsm|ulaw|alaw|g729)/video=0x0 (nothing), combined - 0x108 >> (alaw|g729) Non-codec capabilities: us - 0x1 (g723), peer - 0x2 >> (gsm), combined - 0x0 >> (nothing) >> Looking for 390 in from-sip-external >> list_route: hop: <sip:[EMAIL PROTECTED]:5060> >> >> You can see the line Found no matching peer or user for >> '192.168.44.23:57704' >> >> OK, now if I go into the parameters for my trunk and add the line >> >> Port=57704 >> >> It works!!! >> >> Problem is, the port changes. The question then is, where in my Cisco >> config can I specify the listening (or return) port to 5060 so it >> does not pick an arbitrary port from the pool? >> >> Regards >> >> Mark >> >> >> >> Date: Sun, 22 May 2005 11:10:31 -0400 >> From: Steve Blair <[EMAIL PROTECTED]> >> Subject: Re: [Asterisk-Users] Getting a Cisco gateway to work with >> Asterisk >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> <[email protected]> >> Message-ID: <[EMAIL PROTECTED]> >> Content-Type: text/plain; charset=ISO-8859-1; format=flowed >> >> >> When you say identify I presume you are trying to get the Cisco to >> register as a user. To the best of my knowledge it cannot do this. >> Instead >> define a peer in sip.conf which is the gateway and place traffic >> matching this peer into a context that is defined in your extensions.conf file. >> The >> Cisco will need dial-peer statements to match inbound dialed digits >> and forward all matching calls to your Asterisk box. >> >> >> >> Mark Dutton wrote: >> >> >>>Can anyone please help me with sample IOS commands to get a Cisco >>>gateway working properly with Asterisk. >>> I cannot get my Cisco 2801 with BRI interfaces to call into Asterisk. >>> The Cisco identifies itself as sip:[EMAIL PROTECTED] >>> I cannot figure out how to get it to identify as >>>sip:[EMAIL PROTECTED] The gateway works with other SIP servers >>>that don't require authentication, but Asterisk wants it to >>>authenticate, or at least idenitify itself and I cannot work this bit out. >>> If I put in the host address in my sip.conf, I still get a "cannot >>>find host 192.168.44.23:<random port number>, where <random port >>>number> is actually some random port number. >>> I am at my wits end. >>> Regards >>> Mark >>> >>>--------------------------------------------------------------------- >>>-- >>>- >> >> >> _______________________________________________ >> Asterisk-Users mailing list >> [email protected] >> http://lists.digium.com/mailman/listinfo/asterisk-users >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
