RE: [Asterisk-Users] E&M Tie Line

Mon, 23 May 2005 13:20:22 -0700

Title: Message

I am connecting to an eON Millenium if anyone has done this.

 

Dave

 

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Loretitsch
Sent: Monday, May 23, 2005 4:08 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] E&M Tie Line

 

/etc/zapata.conf


span=1,1,0,esf,b8zs    (adjust to suit your t1 framing and encoding)
e&m=1-24

 

/etc/asterisk/zaptel.conf

 

[channels]
echocancel=yes
echotraining=400
context=default
signalling=featd  (this send *ani*dnis* to my PBX, otherwise use 'em_w' for this parameter
callerid=asreceived
musiconhold=default
group=1
channel=>1-24

 

Are you hooking up to a Definity by chance?  I can send those configs too if you need em'  Pretty easy actually.  I couldn't do a PRI tie line because I'm out of processor channels on the Avaya side.  Bummer!  Good luck!

-Matt


 

-----Original Message-----
From: David Sampson [mailto:[EMAIL PROTECTED]
Sent: Monday, May 23, 2005 3:16 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] E&M Tie Line

How do I setup my T1 card as an E&M tie line?  Any special configuration?

 

 

_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to