I thought the HDSL device acts as an American SmartJack to terminate T1/E1 type services.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Remco Barende Sent: Tuesday, May 24, 2005 2:33 PM To: Asterisk Users List Subject: [Asterisk-Users] Re: Red Alarm TE110P Sorry, forgot one possibly important detail: The old PBX was connected to the PRI via a 'HDSL Desktop unit E1'. I just yanked out the cable into the HDSL desktop unit and stuffed it into the TE110P directly. I assume that's correct and I do not need the HDSL thingy, or do I?? Or do I need to connect the TE110P with another cable from the HDSL thingy out to the TE110P (could I use a standard UTP cable??) Thanks!! On Tue, 24 May 2005, Remco Barende wrote: > Hi! > > I'm trying to setup a Wildcard TE110P with a PRI in The Netherlands. > > I get a Red Alarm on the line. > > Is there any way of debugging this? I've tried some configs that should work > but without success. Is there any way of telling if the cabling is correct or > what else the problem could be? > > Thanks!! > Remco > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
