Re: [Asterisk-Users] Fax and SIP Device

Sat, 28 May 2005 19:37:23 -0700

My local context included all the others context, however i know this is not a good practice.

[Local]
include => ERROR
include => Inter
include => Voicemenu
include => Call_Forward
include => Outgoing
include => Incoming
include => Conference
include => parkedcalls
include => recordings


Rich Adamson wrote: 
A DID number was dedicated to receive fax, but i have the problem when 
getting fax call,
which call will become a normal phone call and no fax was printed. When 
fax is detected,
the fax extension is executed and dial the extension of the HT486 device 
(firmware 1.0.5.22).
Somehow sending fax out working well. In the mailing lists, i notice 
some are using HT286 and it work.
Could someone share theirs experience and give some help?

                E1
PSTN ----------> Asterisk (TE100P) --------> HT486 ----> Fax machine

zapata.conf
[channel]
context=Local
switchtype=euroisdn
signalling=pri_cpe
rxwink=300 
callwaiting=yes
usecallingpres=yes;
callwaitingcallerid=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
echotraining=400
rxgain=0.0
txgain=0.0
immediate=no
faxdetect=both
musiconhold=default

extension.conf
[Incoming]
exten => 8003,1,Answer
exten => 8003,2,Wait(5)
exten => 8003,3,Macro(dial-sip,1300,${LONGTIMEOUT})
exten => fax,1,Dial(SIP/1300,30)
exten => fax,2,Congestion
exten => fax,102,Congestion

sip.conf
[1300]
type=friend
host=dynamic
username=xxx
secret=xxx
nat=yes
context=Local
canreinvite=no
disallow=all
allow=ulaw
allow=alaw

On the other hand, i was tired with getting the same error when 
compiling rxfax/txfax.
spandsp-0.0.2pre18 and spandsp-0.0.1

gcc -O2 -g  -Iinclude -I../include -c -o  app_rxfax.o app_rxfax.c
app_rxfax.c: In function `phase_e_handler':
app_rxfax.c:77: error: structure has no member named `callerid'
make[1]: *** [app_rxfax.o] Error 1

    

In zapta.conf you have:
  [channel]
  context=Local

which sends incoming calls to the Local context.

However, your extensions.conf fax sample is in context [Incoming].

Either that is your issue, or, we'll need to see the [Local]
context.


_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

  

_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to