Hi,
I am using Asterisk 1.0.7 that comes with [EMAIL PROTECTED] 1.0 ISO. I have
installed chan_unicall.c and MFCR2 support with latest Steve Underwood code
unicall-0.0.2pre2 (yes this is the latest version, not 0.0.2pre19!!)
Asterisk process is keeping the cpu at 99% most of the time.
I have two Digium cards and all of them have their unique IRQ, so there is no
irq conflict.
[EMAIL PROTECTED] asterisk]# cat /proc/interrupts
CPU0
0: 381697 XT-PIC timer
1: 4 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 1 XT-PIC serial
7: 3773994 XT-PIC wctdm
8: 1 XT-PIC rtc
11: 230543 XT-PIC eth0
12: 3780190 XT-PIC wcte11xp
14: 19066 XT-PIC ide0
NMI: 0
ERR: 0
When I make 1 call, some times the CPU spikes to 90% but I did not realize this
until there are 2, 3 or more calls at the same time, the cpu keeps at 99% with
audio being scrambled and unintelligible.
Any help is greatly appreciated as this system entered production today and the
customer is getting upset.
Kind regards.
Andres.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
