Hi,
I am quite sure it is asterisk as showed in with the top utility. I have
renamed mpg123 to see if this was causing the problem but the cpu spikes keep
going to 99%....
Asterisk perform well with 1 or 2 calls (with mpg123 and without mpg123) but
when more than 3-4 calls are simultaneous, the load goes to 99% and audio is
bad.
I have noticed 2 asterisk processes at some time with the top utility.
Regards.
Message: 13
Date: Mon, 30 May 2005 14:54:18 -0400
From: Sebastian Silva <[EMAIL PROTECTED]>
Subject: Re: [Asterisk-Users] Urgent Help neededt!! Asterisk 1.0.7 CPU
at 99%
To: Asterisk Users Mailing List - Non-Commercial Discussion
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hi,
Are you sure the process consuming your CPU is Asterisk?
Did you tried with different codecs?
Andres Maduro wrote:
> Hi,
>
> I am using Asterisk 1.0.7 that comes with [EMAIL PROTECTED] 1.0 ISO. I have
> installed chan_unicall.c and MFCR2 support with latest Steve Underwood code
> unicall-0.0.2pre2 (yes this is the latest version, not 0.0.2pre19!!)
>
> Asterisk process is keeping the cpu at 99% most of the time.
>
Sebas
--
----------------------------------------------------------------
iCONOS / TELEMO
Cel. +58 (416) 6235291 / +58 (414) 1275884
Ofi. +58 (212) 9760777 / +58 (212) 9760677
----------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
