Does anyone know the pinout to make a cable so that My Asterisk can talk to my Mitel 200SX?
----- Original Message ----- From: "Henry Devito" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Sunday, April 24, 2005 1:47 PM Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx?? > According to the Mitel manuals that version of SX-200D can only use a > regular 24 channel T1. It can not use a PRI interface. You are going to > have to configure * to use a standard T1 not a PRI D4/AMI is the correct > signaling. > ----- Original Message ----- > From: "Scott Wolfe" <[EMAIL PROTECTED]> > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > <[email protected]> > Sent: Sunday, April 24, 2005 11:09 AM > Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx?? > > > > Thanks Henry, > > -Scott > > > > ----- Original Message ----- > > From: "Henry Devito" <[EMAIL PROTECTED]> > > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > > <[email protected]> > > Sent: Saturday, April 23, 2005 11:05 PM > > Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx?? > > > > > >>I am trying to locate the manual for that level software. If it's not > >>here at home it is at my office and I will look everything up in the > >>morning. > >> ----- Original Message ----- > >> From: "Scott Wolfe" <[EMAIL PROTECTED]> > >> To: "Asterisk Users Mailing List - Non-Commercial Discussion" > >> <[email protected]>; <[EMAIL PROTECTED]> > >> Sent: Saturday, April 23, 2005 9:00 PM > >> Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx?? > >> > >> > >>> The Switch is since 1995 and I get a SX-200 Digital G1005 ENH 672P / > >>> F25.0 09-FEB1994 when I look up the software on the switch board so if I > >>> am reading what your telling me then I have to do D4/AMI. So does my > >>> zaptel look correct? Maybe my cableing is off. > >>> Thanks, > >>> -Scott > >>> ----- Original Message ----- > >>> From: "Henry Devito" <[EMAIL PROTECTED]> > >>> To: <[EMAIL PROTECTED]>; "Asterisk Users Mailing List - > >>> Non-Commercial Discussion" <[email protected]> > >>> Sent: Friday, April 22, 2005 8:34 PM > >>> Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx?? > >>> > >>> > >>>> Of course there are exceptions to the rules. I see now on a couple > >>>> software releases where they do allow PRI with D4/AMI and PRI with > >>>> esf/b8zs. It's been a year or so since I messed with trunking on a > >>>> 200, I've mostly been installing and maintaining the SX2000's and > >>>> 3300's. > >>>> > >>>> Henry > >>>> > >>>> > >>>> > >>>> ----- Original Message ----- > >>>> From: "Dennis Walker" <[EMAIL PROTECTED]> > >>>> To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" > >>>> <[email protected]> > >>>> Sent: Friday, April 22, 2005 9:13 PM > >>>> Subject: RE: [Asterisk-Users] TE11OP -> Mitel 200Sx?? > >>>> > >>>> > >>>>>I have done the same thing with an sx200 and a pri circuit > >>>>> > >>>>> My sx200 can only do ami d4 and e&m channels > >>>>> > >>>>> Here's parts of my config that takes the pri and converts it to e&m > >>>>> with > >>>>> ANI & DNIS > >>>>> > >>>>> zaptel.conf > >>>>> > >>>>> # t1 connected to the PRI circuit > >>>>> span=1,1,0,exf,b8zs > >>>>> > >>>>> # t1 connected to SX200 > >>>>> # the t1 card on my sx200 did d4 ami and I supplied ANI and DNIS > >>>>> through > >>>>> the dial plan > >>>>> > >>>>> span=2,0,0,d4,ami > >>>>> > >>>>> bchan=1-23 > >>>>> dchan=24 > >>>>> e&m=25-47 > >>>>> --------------------------------------------- > >>>>> zapata.conf > >>>>> > >>>>> [channels] > >>>>> > >>>>> echocancel=yes > >>>>> echocancelwhenbridged=yes > >>>>> echotraining=no > >>>>> rxgain=0.0 > >>>>> txgain=0.0 > >>>>> useincomingcalleridonzaptransfer=yes > >>>>> restrictcid=no > >>>>> context=default > >>>>> usecallingpres=yes > >>>>> usercallerid=yes > >>>>> hidecallerid=no > >>>>> callerid="Company Name"<8005551212> > >>>>> signalling=pri_cpe > >>>>> switchtype=dms100 > >>>>> group=1 > >>>>> channel => 1-23 > >>>>> > >>>>> group=2 > >>>>> signalling=em_w > >>>>> emdigitwait=500 > >>>>> channel => 24-47 > >>>>> > >>>>> # I needed the emdigitwait=500 to wait long enough for the SX200 to > >>>>> dial > >>>>> out it's digits > >>>>> > >>>>> > >>>>> -------------------------------------------------- > >>>>> extensions.conf > >>>>> > >>>>> # our PRI circiut gave us the last 4 digits of the dialed number and > >>>>> this > >>>>> is how I passed > >>>>> # *ANI*DNIS* to the SX200 for it to decode > >>>>> > >>>>> # the first group were individual numbers that mapped to faxes and > >>>>> modems > >>>>> > >>>>> exten => 1234,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r) > >>>>> exten => 5555,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r) > >>>>> exten => 3333,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r) > >>>>> > >>>>> # this set mapped our did 5000 - 5199 to the SX200 > >>>>> > >>>>> exten => _5[0-1]XX,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r) > >>>>> > >>>>> The reset of the dial plan took what ever I set up in the sx200 ARS to > >>>>> dial > >>>>> out and > >>>>> sent out put Zap/G1 > >>>>> > >>>>> > >>>>> Hope this helps > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> ---------- > >>>>> From: Henry Devito[SMTP:[EMAIL PROTECTED] > >>>>> Reply To: Asterisk Users Mailing List - Non-Commercial Discussion > >>>>> Sent: Friday, April 22, 2005 8:56 PM > >>>>> To: Scott Wolfe; Asterisk Users Mailing List - Non-Commercial > >>>>> Discussion > >>>>> Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx?? > >>>>> > >>>>> <<File: ATT00262.html>><<File: ATT00263.txt>> > >>>>> I was wrong. I just looked in my Mitel I&M's. What level software > >>>>> are you > >>>>> on in the SX200? Up until a certain level 200's could only do D4/AMI > >>>>> T1's, > >>>>> they could not do PRI's. If it is a newer switch within the past 3 > >>>>> years > >>>>> or an older switch with later software than you can do PRI, but the > >>>>> signaling and framing must be ESF/B8ZS. > >>>>> > >>>>> Henry > >>>>> ----- Original Message ----- > >>>>> From: Scott Wolfe > >>>>> To: [EMAIL PROTECTED] ; Asterisk Users Mailing List - Non-Commercial > >>>>> Discussion > >>>>> Sent: Friday, April 22, 2005 7:04 PM > >>>>> Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx?? > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> Thanks, > >>>>> This is what I have now, but my Mitel PBX and Asterisk Box are > >>>>> unable > >>>>> to communicate via the T1 connection. Asterisk loads ok but I get > >>>>> error > >>>>> lights (blinking orange) on my TE110P and on my Mitel T1 card. Hummmm > >>>>> > >>>>> > >>>>> -Scott > >>>>> > >>>>> /etc/zaptel.conf > >>>>> loadzone = us > >>>>> defaultzone=us > >>>>> span=1,0,0,d4,ami > >>>>> bchan=1-23 > >>>>> dchan=24 > >>>>> > >>>>> /etc/asterisk/zapata.conf > >>>>> [trunkgroups] > >>>>> > >>>>> [channels] > >>>>> context=default > >>>>> switchtype=dms100 > >>>>> rxwink=300 > >>>>> usecallerid=no > >>>>> hidecallerid=no > >>>>> callwaiting=no > >>>>> usecallingpres=yes > >>>>> callwaitingcallerid=no > >>>>> threewaycalling=yes > >>>>> transfer=yes > >>>>> canpark=yes > >>>>> cancallforward=yes > >>>>> callreturn=yes > >>>>> echocancel=yes > >>>>> echocancelwhenbridged=yes > >>>>> rxgain=0.0 ;into the pstn twords the telco > >>>>> txgain=0.0 > >>>>> callgroup=1 > >>>>> pickupgroup=1 > >>>>> immediate=yes > >>>>> > >>>>> signalling=pri_cpe > >>>>> group=1 > >>>>> context=default > >>>>> emdigitwait=500 > >>>>> channel => 1-23 ; Set this to 1-15,17-31 for E1 > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> ----- Original Message ----- > >>>>> From: Michael D Schelin > >>>>> To: Asterisk Users Mailing List - Non-Commercial Discussion > >>>>> Sent: Friday, April 22, 2005 4:48 PM > >>>>> Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx?? > >>>>> > >>>>> > >>>>> Hello Henry > >>>>> e&m=1-23 should be bchan=1-23 > >>>>> you have it set for analog > >>>>> also > >>>>> signaling=pri_cpe > >>>>> > >>>>> > >>>>> Henry Devito wrote: > >>>>> > >>>>> Don't you need one of these directives so the PRI knows which is > >>>>> master and which is slave? > >>>>> > >>>>> a.. pri_cpe: PRI signaling, CPE side > >>>>> a.. pri_net: PRI signaling, Network side > >>>>> > >>>>> Henry > >>>>> ----- Original Message ----- > >>>>> From: Scott Wolfe > >>>>> To: [email protected] > >>>>> Sent: Friday, April 22, 2005 11:01 AM > >>>>> Subject: [Asterisk-Users] TE11OP -> Mitel 200Sx?? > >>>>> > >>>>> > >>>>> Hello all. I just received a TE110P and am trying to hook it to > >>>>> my > >>>>> Mitel 200SX has anyone successfully done this? My configuration is as > >>>>> follows. > >>>>> > >>>>> > >>>>> Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card. > >>>>> > >>>>> > >>>>> All I get is a blinking yellow on my TE110P card and an alarm > >>>>> on my > >>>>> Mitel. T1 card. > >>>>> > >>>>> > >>>>> Any advice would be great. > >>>>> > >>>>> > >>>>> Zaptel.conf > >>>>> > >>>>> span=1,0,1,d4,ami > >>>>> > >>>>> e&m=1-23 > >>>>> > >>>>> dchan=24 > >>>>> > >>>>> > >>>>> Zapata.conf > >>>>> > >>>>> signalling=em_w > >>>>> > >>>>> switchtype=dms100 > >>>>> > >>>>> echocancel=yes > >>>>> > >>>>> echocancelwhenbridged=yes > >>>>> > >>>>> echotraining=400 > >>>>> > >>>>> callerid=asreceived > >>>>> > >>>>> group=1 > >>>>> > >>>>> context=default > >>>>> > >>>>> channel => 1-23 > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> ---------------------------------------------------------------------- -- > >>>>> _______________________________________________ > >>>>> Asterisk-Users mailing list > >>>>> [email protected] > >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>>> To UNSUBSCRIBE or update options visit: > >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>>> ---------------------------------------------------------------------- ---- > >>>>> _______________________________________________ > >>>>> Asterisk-Users mailing list > >>>>> [email protected] > >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>>> To UNSUBSCRIBE or update options visit: > >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>>> > >>>>> > >>>>> > >>>>> ---------------------------------------------------------------------- -- > >>>>> ---- > >>>>> > >>>>> > >>>>> _______________________________________________ > >>>>> Asterisk-Users mailing list > >>>>> [email protected] > >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>>> To UNSUBSCRIBE or update options visit: > >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>>> > >>>>> > >>>>> ---------------------------------------------------------------------- -- > >>>>> ------ > >>>>> > >>>>> > >>>>> _______________________________________________ > >>>>> Asterisk-Users mailing list > >>>>> [email protected] > >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>>> To UNSUBSCRIBE or update options visit: > >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>>> > >>>>> _______________________________________________ > >>>>> Asterisk-Users mailing list > >>>>> [email protected] > >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>>> To UNSUBSCRIBE or update options visit: > >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>> > >>>> _______________________________________________ > >>>> Asterisk-Users mailing list > >>>> [email protected] > >>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>> To UNSUBSCRIBE or update options visit: > >>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>> > >>> _______________________________________________ > >>> Asterisk-Users mailing list > >>> [email protected] > >>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>> To UNSUBSCRIBE or update options visit: > >>> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> _______________________________________________ > >> Asterisk-Users mailing list > >> [email protected] > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > Asterisk-Users mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
