I am trying to make 1 soft SIP UA behind NAT connect to a public hard
CISCO UA via a public asterisk server. The CISCO UA can hear the voice
from the SIP UA but not vice versa. I do set nat to yes for the soft
phone. Any help would be greatly appreciated.
Below is my sip.conf
[general]
port = 8060 ; Port to bind to (SIP is 5060)
bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine)
allow=all ; Allow all codecs
context = bogon-calls ; Send SIP callers that we don't know about here
[2000] ; soft phone behind NAT
type=friend ; This device takes and makes calls
username=2000 ; Username on device
host=dynamic ; This host is not on the same IP addr every time
context=from-sip ; Inbound calls from this host go here
mailbox=100 ; Activate the message waiting light if this
; voicemailbox has messages in it
nat=yes
[2002] ; CISCO hard phone
type=friend
username=2002
secret=2002
host=dynamic
context=from-sip
mailbox=103
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
