Thanks Kevin, but I have done all you suggested. There is a closed bug
on the bug tracking system (#4155) which seems to suggest a problem with
1st gen cards and the 2nd gen driver. Looks as if I need to speak to
tech support (again - the te410P was a bugger to get going in a HP
proliant DL-380, had to get another card sent)
Julian.
Kevin Bockman wrote:
From: Asterisk
I have a TE410P running on CentOS 4 which (fortunately) is my test
system. This card has been working flawlessly for the past few weeks.
Today I did a cvs update to the latest head files, and the card is now
not working. When I try a zaptel start, a series of messages appears on
the console:
Found TE410p at base address fdff0000, remapped to f8a34000
TE410P version c01a010b, burst ON, slip debug: OFF
TE410P running with work queues.
FALC version: 00000005, Board ID: 00
..
(a series of Reg Values)
..
This driver does not support 1st gen modules
and at the tty used to start the zaptel service:
I don't have any experience with this, but from what I have read from
here you need to upgrade zaptel along with asterisk. Did you do that?
Also try clearing out your modules directory first. Update asterisk AND
zaptel, then do an install.
If that doesn't work, someone else will have to help.
Kevin
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
