Well, it seems to be working better now, but everything gets rejected with cause code 44. I probably shouldn't, but I started a new thread about that. I can't call in or out - all cause code 44. I suspect it's coming from the adit - Calling my telco/adit installer.
-- Tom On 6/6/05, Rich Adamson <[EMAIL PROTECTED]> wrote: > Not strange at all. One of the two devices is in loopback mode, and > my first guess would be the 600. Fix that first, then muck with the > parameters in zapata.conf. > > ------------------------ > > Thats really strange, > > one side has to be pri_net and the other pri_cpe always, no matter what > > devices you use > (cisco, asterisk, nortel, ericsson, etc.) > > If you set asterisk as pri_cpe, and it says the other side is also > > configured as pri_cpe, > change it to pri_net. > > If it also says that the other side is configured for pri_net, then there > > must be something > wrong with your adit600. Try checking > > the configuration of the adit600. > > > > Argentilinux > > > > Tom Hayden escribi�: > > > > I Changed it to pri_net and get the following error now: > > > > Jun 6 08:52:17 WARNING[3438]: chan_zap.c:7970 pri_dchannel: PRI > > Error: We think we're the network, but they think they're the network, > > too. > > > > Any ideas? > > > > -- > > Tom > > > > On 6/6/05, Gustavo Alvarez <[EMAIL PROTECTED]> wrote: > > > > > > The problem is that both adit600 and Asterisk box are configured as > > clock slaves (pri_cpe). > > Change pri_cpe to pri_net in your zapata.conf, and your asterisk box > > would be the clock source. > > It should work. Good Luck. > > > > Argentilinux. > > > > Tom Hayden escribi�: > > > > > > > > Hello > > I just installed a TE110P in a Dell Poweredge 750 (rackmount), > > which > > is connected via crossover T1 cable to a adit 600. Anyway, I've > > encountered an array of errors, which I believe I have narrowed > > down > > to the 22 IRQ misses I encounter on zttool. I've noticed that > > the > > te110p and the usb device share an IRQ. Could that be the > > source of my > > woes? Would disabling the usb device in the bios solve my > > problems or > > could it be my configuration? > > > > -- Errors generated by asterisk > > chan_zap.c:7970 pri_dchannel: PRI Error: We think we're the > > CPE, but > > they think they're the CPE too. > > > > ---zaptel.conf > > defaultzone=us > > span=1,1,0,esf,b8zs > > bchan=1-23 > > dchan=24 > > loadzone=us > > > > -- zapata.conf (relevant portions) > > signalling = pri_cpe > > switchtype = national > > group = 2 > > context = fxoout > > cidsignalling = dtmf > > cidstart = polarity > > channel => 1-23 > > > > -- proc/interrupts > > CPU0 > > 0: 6334299 IO-APIC-edge timer > > 1: 14390 IO-APIC-edge keyboard > > 2: 0 XT-PIC cascade > > 8: 3 IO-APIC-edge rtc > > 14: 2 IO-APIC-edge ide0 > > 15: 505440 IO-APIC-edge ide1 > > 21: 150019 IO-APIC-level eth1 > > 22: 63326503 IO-APIC-level t1xxp > > > > -- lspci -bv | grep IRQ > > Flags: bus master, medium devsel, latency 0, IRQ 11 > > Flags: bus master, medium devsel, latency 0, IRQ 10 (USB) > > Flags: bus master, fast devsel, latency 0, IRQ 255 > > Flags: bus master, medium devsel, latency 0, IRQ 7 > > Flags: medium devsel, IRQ 5 > > Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 3 > > Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ > > 11 > > Flags: bus master, medium devsel, latency 32, IRQ 10 > > (**TE110P**) > > Flags: bus master, VGA palette snoop, stepping, medium > > devsel, > > latency 32, IRQ 255 > > > > Thanks in Advance, > > > > > > > > > > > > > ---------------End of Original Message----------------- > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Tom _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
