[EMAIL PROTECTED] src]# modprobe wct4xxp
/lib/modules/2.4.21-32.0.1.ELsmp/misc/wct4xxp.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-32.0.1.ELsmp/misc/wct4xxp.o: insmod /lib/modules/2.4.21-32.0.1.ELsmp/misc/wct4xxp.o failed
/lib/modules/2.4.21-32.0.1.ELsmp/misc/wct4xxp.o: insmod wct4xxp failed
[EMAIL PROTECTED] src]#
I've read lspci should show the card as something like Communication controller: Xilinx Corporation, but on my system it looks like this:
02:08.0 Communication controller: Unknown device d161:0410 (rev 02)
lspci -v says:
02:08.0 Communication controller: Unknown device d161:0410 (rev 02)
Flags: bus master, medium devsel, latency 32, IRQ 52
Memory at dd200000 (32-bit, non-prefetchable) [size=128]
and there is no other device using IRQ 52.
[EMAIL PROTECTED] src]# cat /proc/interrupts
CPU0 CPU1
0: 37107 40339 IO-APIC-edge timer
1: 0 4 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
8: 0 1 IO-APIC-edge rtc
12: 28 373 IO-APIC-edge PS/2 Mouse
15: 0 2 IO-APIC-edge ide1
18: 4284 4293 IO-APIC-level libata
24: 4645 21 IO-APIC-level eth0
NMI: 0 0
LOC: 77355 77353
ERR: 0
MIS: 0
[EMAIL PROTECTED] src]#
any ideas?
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
