David, Thank you. For some reason I'm not getting 0.1.0 build on my system, probably because I miss or have wrong version of header files or -D flags. I lost some time trying to find the ultimate combination of needed sources of the different packages but no success. Therefor I am still curious which combi of packages people use to get the misdn working.
Best regards, Michel On 6/7/05, David Phelan <[EMAIL PROTECTED]> wrote: > Update to at least chan_misdn-0.1.0 .. > I am using snapshot from 11.05.05 without too many issues. > > Dave > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Michel Koenen > Sent: Monday, 6 June 2005 6:28 PM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] mISDN + chan_misdn.so + winbond issue > > Hi all, > > Does anybody of you have the winbond w6692 working with the > mISDN/chan_misdn.so? > > When loading chan_misdn.so from Asterisk, I get a "No lower Id port:1" > error. The /var/log/messages file says: "MISDN free_device: entitylist not > empty" > > I'm using Linux 2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel > 1.0.7 chan_misdn build from chan_misdn-beta-0.0.3-rc6 and against > mISDNuser-CVS-2004-08-29. > > The /dev/mISDN node was also created. > > I'm loading the kernel modules this way: > modprobe zaptel > modprobe ztdummy > modprobe mISDN_core > modprobe mISDN_l1 > modprobe mISDN_l2 > modprobe l3udss1 > modprobe mISDN_dsp > modprobe w6692pci protocol=2 layermask=1 > > Then I start asterisk: > asterisk -c -vvvvvv -dddddd > > When loading chan_misdn.so , Asterisk complains and exits after the last > error line below " [chan_misdn.so] => (Channel driver for mISDN Support > (Bri/Pri)) > debug_init: using stdout for debug log > debug_init: using stderr for warning log > debug_init: using stderr for error log > debug_init: debug_mask = 0 > No lower Id port:1 > init_stack: No such file or directory " > > Contents of the /var/log/messages for all above commands: > Jun 5 20:25:20 pbx kernel: Zapata Telephony Interface Registered on major > 196 Jun 5 20:25:25 pbx kernel: Registered tone zone 0 (United States / > North America) Jun 5 20:25:48 pbx kernel: Modular ISDN Stack core > $Revision: 1.25 $ Jun 5 20:25:53 pbx kernel: ISDN L1 driver version 1.11 > Jun 5 20:25:56 pbx kernel: ISDN L2 driver version 1.20 Jun 5 20:26:02 pbx > kernel: mISDN: DSS1 Rev. 1.29 Jun 5 20:26:07 pbx kernel: mISDN_dsp: Audio > DSP Rev. 1.10 (debug=0x0) Jun 5 20:26:20 pbx kernel: Winbond W6692 PCI > driver Rev. 1.13 Jun 5 20:26:21 pbx kernel: PCI: Found IRQ 9 for device > 0000:00:0f.0 Jun 5 20:26:21 pbx kernel: mISDN_w6692: found adapter Winbond > W6692 at 0000:00:0f.0 Jun 5 20:26:21 pbx kernel: W6692: Winbond W6692 > version (0): W6692 V00 Jun 5 20:26:21 pbx kernel: w6692: IRQ 9 count 4 Jun > 5 20:26:21 pbx kernel: w6692 1 cards installed Jun 5 20:26:34 pbx kernel: > MISDN free_device: entitylist not empty > > > Am I using wrong or incompatible source versions or is this a bug or am I > doing something wrong? > > Btw the misdn.conf contains: > [general] > language=en > immediate=no > debug=0 > > [mycard] > context=incoming > ports=1,2 > msns=72 > > Using ports=1 or ports=2 or changing msns gives the same problems.. > When you have a working configuration, I am curious which source versions of > needed packages you have used. > > Thank you in advance for your response. > > Best regards, > Michel Koenen > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 4/06/2005 > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 4/06/2005 > > > _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
