in zapata.conf use emdigitwait=### number of milliseconds to wait for digits to be output
I had similar problems with MITEL system and had emdigitwait=500 ---------- From: Edwin Lam[SMTP:[EMAIL PROTECTED] Reply To: Asterisk Users Mailing List - Non-Commercial Discussion Sent: Tuesday, June 07, 2005 6:40 PM To: [email protected] Subject: [Asterisk-Users] connecting Asterisk to NEC NEAX system hi. i connected Asterisk to an NEC NEAX system with a crossover T1 cable and the Digium TE405P using E&M wink signaling. the connection's ok. however when dialing from the NEC to the Asterisk. most of the time the Asterisk only sees the first digit of the dialed number(which is 4 digits). some time if i dialed the 4 digits very fast it might get through. seems like there's a timming issue of the DTMF. what can i do to solve this? i looked through the docs for zaptel.conf & zapata.conf and doesn't seems there's any parameters to control the DTMF timing. -- Edwin Lam <[EMAIL PROTECTED]> Systems Engineer, Office General, Inc. Ph: +1 415 439 4988 Fax: +1 415 283 3370 http://pgpkeys.mit.edu:11371/pks/lookup?op=get&search=0xD6506D20 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
