Nick Barnes ha scritto:
I've only ever seen when the signalling is wrong. For example if the line is
in PTMP mode when it should be in PTP or vice-versa.
this is the zapata.conf:
group = 1
context=default
signalling = bri_net_ptmp
channel => 1-2
So, you're using NT mode PTMP signalling.
Is the Asterisk box plugging into an ISDN circuit provided by a telco? If it
is, then use "bri_cpe_ptmp" (for Point to MultiPoint) or "bri_cpe" (for
Point to Point) instead of "bri_net_ptmp". If it's plugged into a different
ISDN device and needs to be in NT mode, then try "bri_net" instead.
you pointed me in the right direction.
the card is connected directly to the telco isdn and it should run in TE
mode, also the signalling should be bri_cpe_ptmp
Thanks
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
