Ok I tried Digium TDM400 cards, I tried X100p cards, I tried Clipcomm
CG-410 4 FXOs device. Now I just ordered a few Sipura 3000.
With the Digium TDM04B cards (4 FXOs) and X100p cards I tried the
following :
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes (I tried 800 with TDM04B cards but it didn't made
any difference)
rxgain= I tried from -8.0 to 10.0
txgain = I tried from -8.0 to 10.0
by the way I live in Canada and the provider is Bell Canada for all
lines (I have over 10 lines at one place and 3 lines at another places)
I tried on a bunch of different computers. I tried on a P4, a dual
Xeon, a dual AMD Opteron, a bunch of Macs too (for X100p cards) a
PowerMac 8500, 9600, 9650, G3 Desktop, G3 B&W and G4.
I have echo problem on all of them. I even tried on different OS.
Fedora Core 1, 2 and 3 for the PCs and Yellow Dog Linux 3.01 and 4.0
for the Macs. I even tried the Clipcomm CG-410 on OS X (10.2.8,
10.3.x and even 10.4)
I'm using Cisco IP Phone 7960 with SIP firmware 7.3 and a few
Granstream GXP-2000. The echo is a lot worst on Cisco phones.
Now I just ordered 5 Sipura 3000 to see if that will remove the echo.
I can't understand why it wouldn't work with the Digium cards...
If someone has a clue to help me figure out how to remove this echo
well let me know as right now I'm considering that all Digium cards
sucks... For Clipcomm well the echo was there and I can't get Caller
ID to work so it's useless...
Thanks
Martin
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
