On Thursday 09 June 2005 00:52, James Bean wrote: > span=1,1,0,ccs,hdb3 > > The same thing happens.
Did you rerun ztcfg? I have heard rumour (but not seen it myself) that you need to fully reset (power off/on, not just reboot) to get the card to accept a new clocking method. > You may consider also that if I connect PAP2 to LAN everything works, > also if I use other ip phone from internet works fine. This tells me that it's not related to LAN. > I also check if I'm loosing interrupts and everything seems ok. Also I > pull out the TDM400 from the box. This tells me it's got nothing to do with the TDM400 or lost interrupts. > At last I change jitterbuffer=16 and it works better, the clicks are > reduced. Could this be possible? What is the function of this parameter > in zapata.conf? You're just masking the issue. > I should tell you that the TE100P is connected to another E1 board (not > a live E1) from Natural Microsystems which acts as a gateway to PSTN. > This board works as a PRI master but I don't think that this could be > the problem as long as using other phones or in LAN it works perfectly > and the voice is clear with no clicks o sound looses. Please try what I suggested above. I am confident it'll solve your problem. -A. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
