What code set is the 500 PRI configured for? Dave
On Fri, 2005-06-10 at 17:05 -0400, [EMAIL PROTECTED] wrote: > Hi Guys, > > I have several * servers connected to T1 PRI's from various service providers > in multiple locations the US. All the * servers use the same hardware with > the same OS and * version. When connected to 5ESS Switches, using the NI2 > (national) PRI protocol, the CID name and number come across fine and > populate into the * CDR fine. I connected to a DMS-500, NI2 (national) > protocol and the CID name doesn't get populated in the * CDR. The only > variance in the PRI debug outputs is this, from the DMS switch: > > Jun 9 16:41:15 WARNING[30369]: chan_zap.c:7133 zt_pri_error: PRI: !! > Facility message shorter than 14 bytes > > The interesting part is that the CID name does come into the * server and is > forwarded to the destination phone, the CID name and number does come across > from the service provider. > > I’m thinking there is something particular with the DMS-500 and * causing > this. Is there a special terminating setting I can throw into Zapata.conf to > help this situation. > > I can send full debug outputs from both working and non-working servers if > needed. > > Any help would be greatly appreciated. > > Thanks in advance. > > JR > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
