How do I set the syslog and debug level? Telnet? Please let me know and I will try. I am pretty desperate.
Thanks -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Adamson Sent: Sunday, June 12, 2005 9:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] how to tell > This helps, Chris. When I press the flash key on my analog phone (connected to SPA-2002), Asterisk does not display this info. I believe that > Asterisk is either not receiving the hook flash from the Sipura or the Sipura is intercepting it and not passing it to the Asterisk box. I have call > waiting on my PSTN line, and I cannot flash the X100P card to switch to the other call. Do you have any ideas? > I don't have a spa-2002, but I believe you'll find the "it" is expecting to do something with the flash. Might consider implementing the syslog logging function in the spa and set a debug level within the spa. On the spa3k, the syslog and debug parameters require the spa to be rebooted to take effect. I don't have a clue whether some parameter is actually available in the spa-2002 to handle forwarding a flash to *. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
