On 13:57, Tue 14 Jun 05, Alexis FECOURT wrote:
Hi,
I am trying to use the attended transfer. So I put this in my feature.conf:
[general]
[featuremap]
atxfer => *0
blindxfer => #0
<snip></snip>
exten => _10X,2,Dial(SIP/${EXTEN},20,htT)
exten => _10X,3,Hangup
Hi,
The problem is in that h param.
If you do a 'show application dial' on the asterisk CLI you
will read this:
'h' -- allow callee to hang up by hitting *.
Remove it, and you'll be fine
Michiel van Baak
Hi,
That is not the problem. I have to put tT to make a transfer, but the pad
composition to dial to make it should be defined in feature.conf
I made some test by putting hH in the Dial command options and
"disconnect => *0" in the feature.conf, but with that configuration I just need to press * and not *0 to be disconnected.
My problem comes from the fact that my featuremap is not used. I read in google
groups:
"This only works on CVS version of *, not the stable 1.0
--
Michiel van Baak"
So I followed the CVS way of getting * from the wiki on voip-info.org...
Nevertheless, no result...
Alexis F�court.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
