[Asterisk-Users] Transfers on PRI connected channel banks and legacy PBX's

[Steve Hanselman]

Hi,   We’re using our legacy PBX as a channel bank with asterisk sitting between the pbx and our telco provider spliced by a TE410P.   If it were a straight analog FXS card then we’d use a hook flash to break into asterisk for transfers etc, does anybody know what the equivalent is for the PRI zaptel support?     Regards   Steve     Steve Hanselman Brendata (UK) Ltd   Tel: +44 (0)1268 466111 Fax: +44 (0)870 1387283 Mob: +44 (0)7973 750993       The information contained in this email is intended for the personal and confidential use of the addressee only. It may also be privileged information. If you are not the intended recipient then you are hereby notified that you have received this document in error and that any review, distribution or copying of this document is strictly prohibited. If you have received this communication in error, please notify Brendata immediately on: +44 (0)1268 466100, or email '[EMAIL PROTECTED]' Brendata (UK) Ltd Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK Registered Office as above. Registered in England No. 2764339 See our current vacancies at www.brendataco.uk

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users