On Wednesday 15 June 2005 04:47, [EMAIL PROTECTED] wrote: > Jun 15 08:45:20 NOTICE[10390]: app_dial.c:972 dial_exec_full: Unable to > create channel of type 'Zap' (cause 0) > == Everyone is busy/congested at this time (1:0/0/1)
Execute "zap show channels" and make sure asterisk sees them. > channel=>1 ; on channel 1 > callerid=01614830073 <dylan> The callerid line won't be part of channel 1's declaration since it's after the channel declaration but other than that it seems to look good. > fxoks=1 # Make sure that the FXS(green) module is closest to the bracket if > you are looking at the side of the card with all of $ > fxsks=4 # FXO module > defaultzone=uk > loadzone=uk > # end of dylan added > OUTBOUND=Zap/4 I didn't see a channel => 4 in your zapata.conf. > Confidentiality Notice: The information contained in this e-mail > is for the intended recipient(s) alone. It may contain privileged > and confidential information that is exempt from disclosure under > English law and if you are not an intended recipient, you must > not copy, distribute or take any action in reliance on it. If > you have received this e-mail in error, please notify us immediately > either by using the reply facility on your e-mail system or by > contacting us at [EMAIL PROTECTED] . If this message is being > transmitted over the Internet, be aware that it may be intercepted > by third parties. Is this really necessary for a mailing list? I mean Christ it's even 10 lines long... -A. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
