Asterisk 1.0.7-BRIstuffed-0.2.0-RC8a on a Debian 3.1
The system is connected with an HFC card directly to the telco line
card is in TE mode
and signalling used is bri_cpe_ptmp
I am able to dial out some "numbers" and some not.
In particular it seems that i can't call mobiles and special telco
numbers like the information call center, emergency numbers,...
If i use a normal hardware isdn phone i am able to do such calls.
This is a call that "works":
-- Executing NoOp("SIP/11-1ecc", "Call to 756756756") in new stack
-- Executing GotoIf("SIP/11-1ecc", "0?3:5") in new stack
-- Goto (default,059305698,5)
-- Executing GotoIf("SIP/11-1ecc", "0?6:8") in new stack
-- Goto (default,059305698,8)
-- Executing NoOp("SIP/11-1ecc", "External call") in new stack
-- Executing Goto("SIP/11-1ecc", "esterni|756756756|1") in new stack
-- Goto (esterni,059305698,1)
-- Executing Dial("SIP/11-1ecc", "Zap/g1/756756756") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g1/756756756
-- Zap/1-1 is ringing
[********************now i hangup]
-- Hungup 'Zap/1-1'
== Spawn extension (esterni, 756756756, 1) exited non-zero on
'SIP/11-1ecc'
-- Executing Goto("SIP/11-1ecc", "default|h|1") in new stack
-- Goto (default,h,1)
-- Executing Hangup("SIP/11-1ecc", "") in new stack
== Spawn extension (default, h, 1) exited non-zero on 'SIP/11-1ecc'
== Primary D-Channel on span 1 down
== Primary D-Channel on span 1 up
This is a call that does NOT work (ir. i'm calling my mobile phone):
== Primary D-Channel on span 1 down
== Primary D-Channel on span 1 up
-- Executing NoOp("SIP/11-9d74", "Call to 37777777") in new stack
-- Executing GotoIf("SIP/11-9d74", "0?3:5") in new stack
-- Goto (default,37777777,5)
-- Executing GotoIf("SIP/11-9d74", "0?6:8") in new stack
-- Goto (default,3473042866,8)
-- Executing NoOp("SIP/11-9d74", "External call") in new stack
-- Executing Goto("SIP/11-9d74", "esterni|37777777|1") in new stack
-- Goto (esterni,37777777,1)
-- Executing Dial("SIP/11-9d74", "Zap/g1/37777777") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g1/37777777
-- Channel 0/1, span 1 got hangup
Jun 16 13:07:17 WARNING[17330]: app_dial.c:412 wait_for_answer: Unable
to forward voice
Jun 16 13:07:17 WARNING[17330]: app_dial.c:412 wait_for_answer: Unable
to forward voice
-- Hungup 'Zap/1-1'
== No one is available to answer at this time
-- Executing Answer("SIP/11-9d74", "") in new stack
-- Executing Playtones("SIP/11-9d74", "congestion") in new stack
-- Executing Congestion("SIP/11-9d74", "") in new stack
Some configuration files:
http://marcopar.altervista.org/extensions.conf
http://marcopar.altervista.org/zapata.conf
http://marcopar.altervista.org/zaptel.conf
in the system messages i'm getting this:
Zapata Telephony Interface Registered on major 196
PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 185
zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd08eaf00 fifo
0xcf338000(0xf338000) IRQ 185 HZ 1000
zaphfc: Card 0 configured for TE mode
zaphfc: 1 hfc-pci card(s) in this box.
Zaptel Configuration
======================
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
Channel map:
Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)
3 channels configured.
frequently i get:
zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff,
card = 0).
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
