On Thu, 16 Jun 2005, Rich Adamson wrote:
> > The E1 card does not receive "clocking" from any span. It "sync's" > the on-board clock to whatever span you choose. If you watch what > others have posted on the list over many months, you'll notice many > have never specified a clock sync source. The problem they have is > typically associated with clicking and other audio distortion; not > a total failure. > Thanks for the correction - by "getting clocking" I didn't mean anything more than syncing clock. Nevertheless, I have had customers, though, with "dead" TE410P setups - exactly this person's symptoms. The cause was having a span selected as the "sync" span but having nothing connected to that port. Adjust zaptel.conf so that span is not a sync source ("0" in position 2) and the board starts to work. Steve _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users