Slow carrier up Slow carrier down Slow carrier up <<< CSI: 40 20 20 20 20 20 20 20 34 39 34 35 36 34 39 35 30 20 39 33 2b CSI without final frame tag Remote fax gave CSI as: "+39 059465494 " <<< DIS: 80 00 ee f8 c4 00 DIS with final frame tag In state 10 DIS: Prefer 256 octet blocks Can receive fax Supported data signalling rates: V.27ter, V.29 and V.17 R8x7.7lines/mm and/or 200x200pels/25.4mm 2D coding Scan line length: 215mm Recording length: A4 (297mm) and B4 (364mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 Error correction mode T.6 coding DCS: Can receive fax Selected data signalling rate: V.29, 9600bps 2D coding Scan line length: 215mm Recording length: A4 (297mm) Minimum scan line time: 20ms Minimum scan line time for higher resolutions: T15.4 = T7.7 Start sending document Start tx document Changed from phase 2 to 4 >>> DCS: 83 00 86 80 80 80 00 HDLC underflow in state 3 Changed from phase 4 to 6 Changed from phase 6 to 3 Slow carrier up <<< CFR: 84 CFR with final frame tag In state 4 Trainability test succeeded Start tx page 0 Slow carrier down Changed from phase 3 to 6 Changed from phase 6 to 4 Start tx page 1 >>> EOP: 2f HDLC underflow in state 14 Changed from phase 4 to 3 Slow carrier up <<< RTN: 4c RTN with final frame tag In state 14 Changed from phase 3 to 4 >>> DCN: fb HDLC underflow in state 2 Disconnecting Changed from phase 4 to 7 Changed from phase 7 to 8 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Can someone explain me what's going on and why the receiver of this fax
guives up saying communication error?
- [Asterisk-Users] TxFax: can't get a fax to destination (... Marco Parmeggiani
- Re: [Asterisk-Users] TxFax: can't get a fax to dest... Lee Howard
- Re: [Asterisk-Users] TxFax: can't get a fax to ... Steve Underwood
