I'm having trouble setting the outbound caller ID on calls I make from my PRI trunk group. The PRIs are served out of a 5ESS. Telco has set the PRIs up for user provided caller id information, so I believe I just don't have it set up right in my dialplan or something. I can't seem to find an example of setting the outbound caller ID specifically for a 5ESS. Does anyone have an example configuration that they have used with a 5ESS switch? Below is the my configuration from Zapata.conf and a sample extension I've tried to use to connect a call with new caller ID information provided by my PBX. Any insight is most appreciated.
[channels] priindication = outofband usecallerid=yes cidsignalling=bell hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=no threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no switchtype=5ess context=main signalling=pri_cpe group=1 channel => 1-23 channel => 25-47 exten => 1234,1,Wait,1 exten => 1234,2,Answer exten => 1234,3,SetCallerPres(allowed_passed_screen) exten => 1234,4,SetCIDNum(8881234567) exten => 1234,5,Dial(Zap/g1/18887654321,,,) exten => 1234,6,Hangup Thanks, Shaun Tierney _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
