The reload command does not re-implement every single parameter change, therefore in many cases one has to stop & restart asterisk.
> I have a problem with the cvs head zaptel library: I cannot update my > zapata.conf into asterisk when I issue the reload command from the CLI > prompt; only when I stop and restart the asterisk service. > > > > The system sends the following message: > > > > Jun 20 09:49:14 WARNING[3754]: chan_zap.c:10364 setup_zap: > Ignoring switchtype > > Jun 20 09:49:14 WARNING[3754]: chan_zap.c:10364 setup_zap: Ignoring signalling > > -- Reconfigured channel 1, FXS Kewlstart signalling > > -- Reconfigured channel 2, FXS Kewlstart signalling > > -- Reconfigured channel 3, FXS Kewlstart signalling > > Jun 20 09:49:14 ERROR[3754]: chan_zap.c:9827 setup_zap: Unable to reconfigure > channel '4' > > Jun 20 09:49:14 WARNING[3754]: chan_zap.c:10567 reload: Reload of chan_zap.so > is unsuccessful! > > > > I have the simplest configuration: > > > > [trunkgroups] > > [channels] > > language=en > > context=default > > switchtype=national > > > > signalling=fxs_ks > > channel => 1 > > channel => 2 > > channel => 3 > > > > I was using the cvs head version because I need the wctdm driver for the > TDM04B (4*fxo modules) > > Does anybody know what is wrong? > > > > Thanks in advance!! > > > > Jairo Barahona Garita > > inCom Developer ---------------End of Original Message----------------- _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
