Digium logged in and fixed the problem. It seems they had to fix the zaptel
source code - so not really something I could easily have done. something
about adding the subvendors ID to the cards source. So I assume a bug.
I personally feel a little indebted to Digium for sorting the problem and
obviously making the Asterisk available. But would like them even more if I
didn't have to go through these problems ;)
Angus
----- Original Message -----
From: "John Novack" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<[email protected]>
Sent: Wednesday, June 22, 2005 2:08 PM
Subject: Re: [Asterisk-Users] How can you check that egTDM04B
hardwareinstalled and drivers OK
Probably means that your perfectly good motherboard can't see the TDM
card.
There are many motherboards that this card doesn't seem to work with,
Digium doesn't seem willing to address the issue or even acknowledge that
is the case, and usually answers " try another motherboard" rather than
'fess up that there is a design problem with the PCI interface and correct
it.
PCI 2.2 is a stated requirement, but there is certainly more to the story
than that.
In addition, when the board CAN be seen, report rev E/F when the
silkscreen reads Rev H, someone mentioned there is now a Rev I ( good luck
getting an exchange ) and Digium 's answer is " if we can see it through
remote access" then there is no reason to replace it, and if we can't, try
another MB.
Overall, if it works, lucky you, if not, Too bad.
Hard to support Digium and suggest others purchase such a product.
Best you look for other interfaces to Asterisk.
John Novack
Angus Comber wrote:
If I try dmesg - no mention of a Wildcard TDM400.
Sorry I am fairly new to Linux. In Windows I suppose I would run some
hardware program which came with the card to see if I could manually set
IRQ's etc. What should I be looking at now?
Please feel free to point me to a good book or whatever you feel is
appropriate. Could the card be faulty?
My motherboard is an Intel D865GLC.
I am running [EMAIL PROTECTED] version 1.0
Angus
----- Original Message ----- From: "Mike M"
<[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, June 21, 2005 3:14 PM
Subject: Re: [Asterisk-Users] How can you check that eg TDM04B
hardwareinstalled and drivers OK
On Tue, Jun 21, 2005 at 07:09:46AM -0600, Rich Adamson wrote:
> I am struggling to get my TDM04B working. Just to rule out a
hardware > problem how can I check
that the hardware works? How can I then
> check that the drivers are loaded correctly?
>
1. from the linux command line, type 'dmesg' and look for
Found a Wildcard TDM: Wildcard TDM400P REV H (4 modules)
if you see that, the TDM card is recognized by the OS.
Here's what I get on a working system:
[EMAIL PROTECTED] src]# modprobe wctdm
[EMAIL PROTECTED] src]# Jun 21 10:10:55 b2 kernel: PCI: Found IRQ 11 for device
01:0a.0
Jun 21 10:10:55 b2 kernel: Freshmaker version: 71
Jun 21 10:10:55 b2 kernel: Freshmaker passed register test
Jun 21 10:10:55 b2 kernel: Module 0: Installed -- AUTO FXS/DPO
Jun 21 10:10:55 b2 kernel: Module 1: Not installed
Jun 21 10:10:55 b2 kernel: Module 2: Not installed
Jun 21 10:10:55 b2 kernel: Module 3: Not installed
Jun 21 10:10:55 b2 kernel: Found a Wildcard TDM: Wildcard TDM400P REV
E/F (4 modules)
Jun 21 10:10:55 b2 kernel: Registered tone zone 0 (United States / North
America)
[EMAIL PROTECTED] src]# cat /proc/interrupts
CPU0
0: 17893766 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 357411641 XT-PIC eth0, wanpipe1
8: 1 XT-PIC rtc
10: 3381408 XT-PIC Intel ICH2
11: 178236906 XT-PIC wctdm
14: 50492 XT-PIC ide0
15: 0 XT-PIC ide1
NMI: 0
ERR: 0
[EMAIL PROTECTED] src]# cat /proc/interrupts
CPU0
0: 17894203 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 357419974 XT-PIC eth0, wanpipe1
8: 1 XT-PIC rtc
10: 3381408 XT-PIC Intel ICH2
11: 178241275 XT-PIC wctdm
14: 50494 XT-PIC ide0
15: 0 XT-PIC ide1
NMI: 0
ERR: 0
--
Mike
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
