Hi,klaus
Thank you for your answer.After we add 
"SET(CHANNEL(transfercapability)=VIDEO",the avaya PBX said "BCC 
incompatible",then refused our call request.That is to say the avaya pbx 
doesn't support digital mode,and only "speech" and "3.1khz" are supported by 
avaya pbx.But when the avaya pbx was replaced by an asterisk pbx,everything is 
ok.That is to say our first gateway connected to the asterisk pbx through 
E1,signaling is pri;and the second gateway connected to the same asterisk pbx 
through another E1,signaling is also pri.When we start h324m_call on the first 
gateway,the h324m_gw and h324m_gw_answer work ok,video and voice is ok.But when 
we didn't use "SET(CHANNEL(transfercapability)=VIDEO",everything is also ok,and 
we check the transfercapability,it shows "SPEECH".So I don't know whether the 
"SET(CHANNEL(transfercapability)=VIDEO" is necessary. Another question,if we 
use ss7 to replace pri,does this set is needed?
 
best regards
Qy.Chen
2009-8-25



在2009-08-24?16:00:11,"Klaus?Darilion"?<[email protected]>?写道:
>Take?a?look?at?the?outgoing?SETUP?message.?Does?it?signal?the?call?as?
>"unrestricted?digital?..."?in?bearer?information??If?no,?I?guess?the?PBX?
>thinks?this?is?an?audio?call?and?applies?transcoding?which?breaks?h324m.?
>Try?to?set?"digital"?with?the?CHANNEL(transfercapability)?function.
>
>regards
>klaus
>
>chenqy2?schrieb:
>>?Hi,all
>>????We're?using?asterisk+h324m?to?make?3g?gateway,and?the?hardware?is?pc?
>>?+?digium?TE210PF?card.?Now?we?made?two?gateways?.First?,we?connect?the?
>>?two?gateway?directly?through?E1.We?run?h324m_call?on?the?first?
>>?gateway,and?run?h324m_gw?and?h324m_gw_answer?on?the?second?
>>?gateway,everything?is?ok.But?when?we?add?a?pbx?in?the?middle?of?the?two?
>>?gateway,the?call?failed.I?described?it?in?detail.The?first?gateway?
>>?connected?to?AVAYA?pbx?8730?through?E1,signaling?is?pri,and?the?second?
>>?gateway?connect?to?the?same?AVAYA?pbx?8730?through?another?E1,signaling?
>>?is?also?pri.When?we?run?h324m_call?on?the?first?gateway?to?make?call,we?
>>?found?the?second?gateway?had?answered?the?call,the?h324m_gw?and?the?
>>?h324m_gw_answer?on?the?second?gateway?has?been?excuted,but?whatever?the?
>>?h324m_call?running?on?the?first?gateway?or?the?h324m_gw?and?the?
>>?h324m_gw_answer?running?on?the?second?gateway,?they?all?stopped?after?
>>?the?information?"H324M?changed?state?1"?appears,until?we?hangup?
>>?manually.I?think?the?avaya?pbx?is?only?a?*transparent?way,?so?it?is?the?
>>?same?as?the?two?gateway's*?direct-connection.I?don't?know?why?the?call?
>>?failed??Who?can?help?me??The?asterisk?version?is?1.6.1.1,the?libpri?
>>?version?is?1.4.10.1,the?dahdi?version?is?2.2.0.1,the?E1?card?is?digium?
>>?TE210PF,and?we?haven't?use?LLC?patch.
>>?regards
>>?Qy.Chen
>>?2009-8-23
>>?
>>?
>>?------------------------------------------------------------------------
>>?没有广告的终身免费邮箱,www.yeah.net?<http://www.yeah.net/?from=footer>
>>?
>>?
>>?------------------------------------------------------------------------
>>?
>>?_______________________________________________
>>?--Bandwidth?and?Colocation?Provided?by?http://www.api-digital.com--
>>?
>>?asterisk-video?mailing?list
>>?To?UNSUBSCRIBE?or?update?options?visit:
>>????http://lists.digium.com/mailman/listinfo/asterisk-video
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-video

Reply via email to