Activate pri intense debug span 1
and send the console output while you make a 3G video call. -----Mensaje original----- De: [email protected] [mailto:[email protected]] En nombre de Low Yu Siang Enviado el: miércoles, 07 de octubre de 2009 4:50 Para: [email protected] Asunto: [Asterisk-video] H324M over mISDN problem Hi all, I am trying to setup H324M on a BRI system via mISDN. The video calls can be successfully received. However, it seems that after the video call is hung up, the port/channel is not released immediately(for a few minutes) everytime. Voice calls doesn't face the same issue. >From what I see from the mISDN log, if "P[ 4] BCHAN: DeACT Conf" doesn't appear in the log after the video call is hung up, no incoming call can be accepted until "P[ 4] MGMT: SSTATUS: L2_RELEASED" appears(after a few minutes) in the log. This could be mISDN configuration mistake(this is my first attempt with BRI/mISDN) and might not be related to asterisk-video, though I hope that someone here might have experience/solution regarding to this problem. Regards, Low Yu Siang _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-video mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-video _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-video mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-video
