25 feb 2011 kl. 22.02 skrev CM Rahman: > Yes. it is. If I dial direct, it is fine. but if I use asterisk as a sip > proxy, the size is smaller. Any idea why? 1. Asterisk is not a SIP proxy, it's a b2bua 2. Asterisk strips all the properties of the video codecs making the video media useless
/O > > From: Jamie A. Stapleton <[email protected]> > To: Development discussion of video media support in Asterisk > <[email protected]> > Sent: Fri, February 25, 2011 10:10:36 AM > Subject: Re: [Asterisk-video] Lifesize VC and Asterisk > > Is lifesize being used on both ends of the call? > > On Feb 24, 2011, at 10:57 AM, CM Rahman wrote: > > Anybody here using asterisk and lifesize express? I am trying to use it. It > dials fine but the video size is smaller. Is there any where I can twick to > get the right video size? > > Thanks > CM > > ________________________________ > From: pankaj pandey <[email protected]<mailto:[email protected]>> > To: [email protected]<mailto:[email protected]> > Sent: Thu, February 24, 2011 5:19:29 AM > Subject: Re: [Asterisk-video] asterisk-video Digest, Vol 58, Issue 12 > > > thanks for reply Sergio... > > please find the attached log > > > > > > -- Executing [90xxxxxxxx@3G:1] h324m_call("SIP/100-b7421e80", > "90xxxxxxxx@3Gout") in new stack > > -- Executing [90xxxxxxxx@3Gout:1] Set("Local/90xxxxxxxx@3Gout-f57d,2", > "CHANNEL(transfercapability)=VIDEO") in new stack > > -- Executing [90xxxxxxxx@3Gout:2] NoOp("Local/90xxxxxxxx@3Gout-f57d,2", > "transfer=VIDEO") in new stack > > -- Executing [90xxxxxxxx@3Gout:3] Set("Local/90xxxxxxxx@3Gout-f57d,2", > "CHANNEL(userinformationlayer1)=38") in new stack > > -- Executing [90xxxxxxxx@3Gout:4] NoOp("Local/90xxxxxxxx@3Gout-f57d,2", > "ul1=38") in new stack > > -- Executing [90xxxxxxxx@3Gout:5] Dial("Local/90xxxxxxxx@3Gout-f57d,2", > "ZAP/g1/90xxxxxxxx") in new stack > > -- Making new call for cr 32780 > > -- digital call, setting user information layer 1 to 38 (0x26) > > -- Requested transfer capability: 0x18 - VIDEO > > > Protocol Discriminator: Q.931 (8) len=36 > > > Call Ref: len= 2 (reference 12/0xC) (Originator) > > > Message type: SETUP (5) > > > [04 03 88 90 a6] > > > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer > > capability: Unrestricted digital information (8) > > > Ext: 1 Trans mode/rate: 64kbps, circuit-mode > > (16) > > > User information layer 1: H.223 and H.245 > > (38) > > > [18 03 a9 83 81] > > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive > > Dchan: 0 > > > ChanSel: Reserved > > > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > > > Ext: 1 Channel: 1 ] > > > [6c 05 21 80 31 30 30] > > > Calling Number (len= 7) [ Ext: 0 TON: National Number (2) NPI: > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > > > Presentation: Presentation permitted, user number > > not screened (0) '100' ] > > > [70 0b 80 39 30 31 33 36 38 34 32 39 33] > > > Called Number (len=13) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown > > Number Plan (0) '90xxxxxxxx' ] > > > [a1]ost*CLI> > > > Sending Complete (len= 1) > > q931.c:3245 q931_setup: call 32780 on channel 1 enters state 1 (Call > Initiated) > > -- Called g1/90xxxxxxxx > > < Protocol Discriminator: Q.931 (8) len=10 > > < Call Ref: len= 2 (reference 12/0xC) (Terminator) > > < Message type: CALL PROCEEDING (2) > > < [18 03 a9 83 81] > > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive > Dchan: 0 > > < ChanSel: Reserved > > < Ext: 1 Coding: 0 Number Specified Channel Type: 3 > > < Ext: 1 Channel: 1 ] > > -- Processing IE 24 (cs0, Channel Identification) > > q931.c:3800 q931_receive: call 32780 on channel 1 enters state 3 (Outgoing > call Proceeding) > > -- Zap/1-1 is proceeding passing it to Local/90xxxxxxxx@3Gout-f57d,2 > > < Protocol Discriminator: Q.931 (8) len=9 > > < Call Ref: len= 2 (reference 12/0xC) (Terminator) > > < Message type: PROGRESS (3) > > < [1e 02 8a 84] > > < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: > 0 Location: Network beyond the interworking point (10) > > < Ext: 1 Progress Description: Unknown (4) ] > > -- Processing IE 30 (cs0, Progress Indicator) > > -- Zap/1-1 is making progress passing it to Local/90xxxxxxxx@3Gout-f57d,2 > > < Protocol Discriminator: Q.931 (8) len=5 > > < Call Ref: len= 2 (reference 12/0xC) (Terminator) > > < Message type: ALERTING (1) > > q931.c:3715 q931_receive: call 32780 on channel 1 enters state 4 (Call > Delivered) > > -- Zap/1-1 is ringing > > < Protocol Discriminator: Q.931 (8) len=12 > > < Call Ref: len= 2 (reference 12/0xC) (Terminator) > > < Message type: CONNECT (7) > > < [29 05 0b 02 18 0f 25] > > < Time Date (len= 7) [ 11-02-24 15:37 ] > > -- Processing IE 41 (cs0, Date/Time) > > q931.c:3745 q931_receive: call 32780 on channel 1 enters state 10 (Active) > > > Protocol Discriminator: Q.931 (8) len=5 > > > Call Ref: len= 2 (reference 12/0xC) (Originator) > > > Message type: CONNECT ACKNOWLEDGE (15) > > -- Zap/1-1 answered Local/90xxxxxxxx@3Gout-f57d,2 > > == Spawn extension (3Gout, 90xxxxxxxx, 5) exited non-zero on > 'Local/90xxxxxxxx@3Gout-f57d,2' > > < Protocol Discriminator: Q.931 (8) len=9 > > < Call Ref: len= 2 (reference 12/0xC) (Terminator) > > < Message type: DISCONNECT (69) > > < [08 02 80 90] > > < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 > Location: User (0) > > < Ext: 1 Cause: Normal Clearing (16), class = Normal Event > (1) ] > > -- Processing IE 8 (cs0, Cause) > > q931.c:3935 q931_receive: call 32780 on channel 1 enters state 12 (Disconnect > Indication) > > -- Channel 0/1, span 1 got hangup request, cause 16 > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, > peerstate Disconnect Request > > q931.c:3068 q931_release: call 32780 on channel 1 enters state 19 (Release > Request) > > > Protocol Discriminator: Q.931 (8) len=9 > > > Call Ref: len= 2 (reference 12/0xC) (Originator) > > > Message type: RELEASE (77) > > > [08 02 81 90] > > > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 > > Location: Private network serving the local user (1) > > > Ext: 1 Cause: Normal Clearing (16), class = Normal Event > > (1) ] > > -- Hungup 'Zap/1-1' > > == Auto fallthrough, channel 'SIP/100-b7421e80' status is 'UNKNOWN' > > < Protocol Discriminator: Q.931 (8) len=5 > > < Call Ref: len= 2 (reference 12/0xC) (Terminator) > > < Message type: RELEASE COMPLETE (90) > > q931.c:3875 q931_receive: call 32780 on channel 1 enters state 0 (Null) > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null > > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null > > > --- On Thu, 24/2/11, > [email protected]<mailto:[email protected]> > > <[email protected]<mailto:[email protected]>> > wrote: > > From: > [email protected]<mailto:[email protected]> > > <[email protected]<mailto:[email protected]>> > Subject: asterisk-video Digest, Vol 58, Issue 12 > To: [email protected]<mailto:[email protected]> > Date: Thursday, 24 February, 2011, 3:48 AM > > Send asterisk-video mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.digium.com/mailman/listinfo/asterisk-video > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of asterisk-video digest..." > > > Today's Topics: > > 1. Re: video obd call |h324m gw (sudhir mor) > 2. Re: video obd call |h324m gw (Sergio Garcia Murillo) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 24 Feb 2011 13:57:57 +0530 (IST) > From: sudhir mor <[email protected]> > Subject: Re: [Asterisk-video] video obd call |h324m gw > To: Development discussion of video media support in Asterisk > <[email protected]> > Message-ID: <[email protected]> > Content-Type: text/plain; charset="utf-8" > > Hi Pankaj, > > Please follow help from this link > https://issues.asterisk.org/view.php?id=10189 > ? > Sudhir Mor > Senior Developer > Voicetap Technologies > Mobile : +91-9891318796 > ________________________________ > > > > > > ________________________________ > From: pankaj pandey <[email protected]> > To: [email protected] > Sent: Thu, 24 February, 2011 1:35:02 PM > Subject: [Asterisk-video] video obd call |h324m gw > > > Hi everyone, > ? > My first scenario > 3G phone -> asterisk(h324m gw)->sip > Is working fine. > ? > when I try a video OBD from sip > i.e. > SIP -> asterisk(h324m gw)-> 3G phone > ? > Video OBD call is originated at 3G phone end and it is shows as video call, > but > when I picking the call it shows an ?Unknown Error? and call cut with ?hangup > request, cause 16.. > ? > below is the dial-plan and cli log. > ? > ? > please suggest the way forward... > ? > ? > ? > [3G] > exten =>? _X.,1,h324m_call(${EXTEN}@3Gout) > ? > [3Gout] > exten =>? _X.,1,Set(CHANNEL(transfercapability)=VIDEO) > exten =>? _X.,2,NoOp(transfer=${CHANNEL(transfercapability)}) > exten =>? _X.,3,Set(CHANNEL(userinformationlayer1)=38) > exten =>? _X.,4,NoOp(ul1=${CHANNEL(userinformationlayer1)}) > exten =>? _X.,n,Dial(ZAP/g1/${EXTEN}) > ? > ? > - Executing [93xxxxxxxx@3G:1] h324m_call("SIP/100-096dc4a0", > "93xxxxxxxx@3Gout") > in new stack > ??? -- Executing [93xxxxxxxx@3Gout:1] Set("Local/93xxxxxxxx@3Gout-ad7c,2", > "CHANNEL(transfercapability)=VIDEO") in new stack > ??? -- Executing [93xxxxxxxx@3Gout:2] NoOp("Local/93xxxxxxxx@3Gout-ad7c,2", > "transfer=VIDEO") in new stack > ??? -- Executing [93xxxxxxxx@3Gout:3] Set("Local/93xxxxxxxx@3Gout-ad7c,2", > "CHANNEL(userinformationlayer1)=38") in new stack > ??? -- Executing [93xxxxxxxx@3Gout:4] NoOp("Local/93xxxxxxxx@3Gout-ad7c,2", > "ul1=38") in new stack > ??? -- Executing [93xxxxxxxx@3Gout:5] Dial("Local/93xxxxxxxx@3Gout-ad7c,2", > "ZAP/g1/93xxxxxxxx") in new stack > ??? -- digital call, setting user information layer 1 to 38 (0x26) > ??? -- Requested transfer capability: 0x18 - VIDEO > ??? -- Called g1/93xxxxxxxx > ??? -- Zap/1-1 is proceeding passing it to Local/93xxxxxxxx@3Gout-ad7c,2 > ??? -- Zap/1-1 is making progress passing it to Local/93xxxxxxxx@3Gout-ad7c,2 > ??? -- Zap/1-1 is ringing > ??? -- Zap/1-1 answered Local/93xxxxxxxx@3Gout-ad7c,2 > ? == Spawn extension (3Gout, 93xxxxxxxx, 5) exited non-zero on > 'Local/93xxxxxxxx@3Gout-ad7c,2' > ??? -- Channel 0/1, span 1 got hangup request, cause 16 > ??? -- Hungup 'Zap/1-1' > > Thanks, > Pankaj > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.digium.com/pipermail/asterisk-video/attachments/20110224/b6308506/attachment-0001.htm> > > ------------------------------ > > Message: 2 > Date: Thu, 24 Feb 2011 09:47:00 +0100 > From: Sergio Garcia Murillo <[email protected]> > Subject: Re: [Asterisk-video] video obd call |h324m gw > To: Development discussion of video media support in Asterisk > <[email protected]> > Message-ID: <[email protected]> > Content-Type: text/plain; charset="utf-8"; Format="flowed" > > > Enable debug on asterisk and attach log again > > Best regards > Sergio > > El 24/02/2011 9:05, pankaj pandey escribi?: > > > > Hi everyone, > > > > My first scenario > > > > 3G phone -> asterisk(h324m gw)->sip > > > > Is working fine. > > > > when I try a video OBD from sip > > > > i.e. > > > > SIP -> asterisk(h324m gw)-> 3G phone > > > > Video OBD call is originated at 3G phone end and it is shows as video > > call, but when I picking the call it shows an ?Unknown Error? and call > > cut with hangup request, cause 16.. > > > > below is the dial-plan and cli log. > > > > please suggest the way forward... > > > > [3G] > > > > exten =>_X.,1,h324m_call(${EXTEN}@3Gout) > > > > [3Gout] > > > > exten =>_X.,1,Set(CHANNEL(transfercapability)=VIDEO) > > > > exten =>_X.,2,NoOp(transfer=${CHANNEL(transfercapability)}) > > > > exten =>_X.,3,Set(CHANNEL(userinformationlayer1)=38) > > > > exten =>_X.,4,NoOp(ul1=${CHANNEL(userinformationlayer1)}) > > > > exten =>_X.,n,Dial(ZAP/g1/${EXTEN}) > > > > - Executing [93xxxxxxxx@3G:1] h324m_call("SIP/100-096dc4a0", > > "93xxxxxxxx@3Gout") in new stack > > > > -- Executing [93xxxxxxxx@3Gout:1] Set("Local/93xxxxxxxx@3Gout-ad7c,2", > > "CHANNEL(transfercapability)=VIDEO") in new stack > > > > -- Executing [93xxxxxxxx@3Gout:2] > > NoOp("Local/93xxxxxxxx@3Gout-ad7c,2", "transfer=VIDEO") in new stack > > > > -- Executing [93xxxxxxxx@3Gout:3] Set("Local/93xxxxxxxx@3Gout-ad7c,2", > > "CHANNEL(userinformationlayer1)=38") in new stack > > > > -- Executing [93xxxxxxxx@3Gout:4] > > NoOp("Local/93xxxxxxxx@3Gout-ad7c,2", "ul1=38") in new stack > > > > -- Executing [93xxxxxxxx@3Gout:5] > > Dial("Local/93xxxxxxxx@3Gout-ad7c,2", "ZAP/g1/93xxxxxxxx") in new stack > > > > -- digital call, setting user information layer 1 to 38 (0x26) > > > > -- Requested transfer capability: 0x18 - VIDEO > > > > -- Called g1/93xxxxxxxx > > > > -- Zap/1-1 is proceeding passing it to Local/93xxxxxxxx@3Gout-ad7c,2 > > > > -- Zap/1-1 is making progress passing it to Local/93xxxxxxxx@3Gout-ad7c,2 > > > > -- Zap/1-1 is ringing > > > > -- Zap/1-1 answered Local/93xxxxxxxx@3Gout-ad7c,2 > > > > == Spawn extension (3Gout, 93xxxxxxxx, 5) exited non-zero on > > 'Local/93xxxxxxxx@3Gout-ad7c,2' > > > > -- Channel 0/1, span 1 got hangup request, cause 16 > > > > -- Hungup 'Zap/1-1' > > > > > > > > Thanks, > > Pankaj > > > > > > > > -- > > _____________________________________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > > asterisk-video mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-video > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.digium.com/pipermail/asterisk-video/attachments/20110224/bb14a1fb/attachment.htm> > > ------------------------------ > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-video mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-video > > End of asterisk-video Digest, Vol 58, Issue 12 > ********************************************** > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-video mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-video > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-video mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-video > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-video mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-video --- * Olle E Johansson - [email protected] * Cell phone +46 70 593 68 51, Office +46 8 96 40 20, Sweden -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-video mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-video
