[EMAIL PROTECTED] wrote:
Well I have a Sipura 3000 connected at my home in Georgetown which takes inbound
PSTN calls back to an * server in Brampton (to an IVR menu), the FXS port on this
device is an extension of the * server
* is able to use the FXO port for outbound PSTN calls in Georgetown if the correct
prefix is entered
I'll admit it took some playing around, but once configured has worked
flawlessly
What tact did you take in configuring it? And were you adding it to a
working * setup, or were you working from scratch? I have been trying
to get a "minimal" asterisk configuration working, but even that seems
to be rather bloated.
Does anyone know what the true minimum configuration for * with a single
SIP friend and voicemail? I would have thought I could get away with
asterisk.conf, sip.conf, extensions.conf and voicemail.conf, but when I
try that I get errors from chan_modem.so. If I add an empty version of
the config for that module, another one comes up an whines. The process
repeats until by the time * will start up, I no longer have anything
that could be called minimal.
I've tried turning off module autoload and just pulling in the modules
that I think I need, but there seem to be some complex
inter-dependencies. For example, a few symbols in chan_modem are used
by other modules, even if you don't have any ISDN modem cards installed.
Any chance you be willing to share your configuration (off list)?
Thanks
--
james
