[300] (port 1 on the PAP2) username=300 type=friend secret=**** record_out=Adhoc record_in=Adhoc qualify=no port=5060 nat=1 [EMAIL PROTECTED] host=dynamic dtmfmode=rfc2833 context=from-internal canreinvite=no callerid=device <300>
[301] (port 2 on the PAP2) username=301 type=friend secret=**** record_out=Adhoc record_in=Adhoc qualify=no port=5060 nat=1 [EMAIL PROTECTED] host=dynamic dtmfmode=rfc2833 context=from-internal canreinvite=no callerid=device <301> The PAP2 was setup using the default settings, the only information I added was the usernames and passwords for the 2 extension, 300 and 301. I far as I can tell the call waiting or call forwarding plays no part in the inability of PAP2 to process more than 1 inbound call. ----- Original Message ----- From: "Nabeel Jafferali" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, January 30, 2006 11:24 AM Subject: **SPAM: [>>> SPAM <<<] - RE: [on-asterisk] Linksys PAP2 [EMAIL PROTECTED] - Email found in subject > The > plan was to call forward on busy from the main line, to the second > extension > on the PAP2, doesn't work, additionally, the PAP2 will only take one call > and then locks up. I can make outbound calls but any subsequent inbound go > straight to voicemail, hard reboot will allow one inbound call and so on, > any ideas? Thanks Mark Give us your sip.conf entries and the parameters you set on the PAP2 and we might be able to help. Nabeel --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
