afaik, you need ABE to use the dialogic drivers and even then there is a per DSO charge to use the channel drivers. And unlike the the g729 codec theres no source code to bootleg here. if its compatible with the linux driver for D/480-JCT then it will support asterisk just fine but you wont be able to take advantage of the call logging, recording or monitoring features of the firmware.
You might consider using bayonne, it takes more advantage of the hmp intel architecture and the dsps on board. Or you can throw it away and buy a Sangoma card which although doesnt have all those features built into the card is actually better as far as echo can. goes ;). Just the cost of abe and the driver will make up for the price of throwing it away and using open source asterisk. Im saying this from personal experience. ---- Shidan ** On 3/13/06, Liviu Toma <[EMAIL PROTECTED]> wrote: > > Has anybody setup Asterisk with Dialogic T1 boards ? > I saw some boards listed as supported on the web site at > http://www.asterisk.org/hardware, but mine is not listed. I have a > DM/V480-2T1, the closest on the list is D/480JCT-2T1. According to some > people they are almost the same. Can anybody confirm ? > What driver supports Dialogic boards under Asterisk ? > > Thanks, > Liviu > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
