Yeah, I was thinking of trying that. The only problem is it doesnt help me with my 7970s (and I could have just gone back to 7.4 firmware with the 40/60s if it became a huge issue, unfortunately I dont have that luxury with the 7970s.)
But thanks for the URL, I'll try it out and see if it makes a difference. On 4/17/06, Nabeel Jafferali <[EMAIL PROTECTED]> wrote: > A non-CCM SIP 8.2 load has been released: > > http://lists.digium.com/pipermail/asterisk-users/2006-April/148356.html > > That might help you. > > Nabeel > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of > > Gary T. Giesen > > Sent: April 17, 2006 5:58 PM > > To: [email protected] > > Subject: Re: [on-asterisk] Authentication Issues with Cisco > > Phones with latest SIP firmware > > > > After some more investigation, the issue appears to be NAT-related. > > I'm guessing somewhere along the line, NAT ips are messing up > > the hashes. No matter what combination of NAT settings on > > both the asterisk and phone I use, I cant get it to > > authenticate on calls. If I stop using NAT altogether, it > > works great. I know this worked on the 7940 with 7.4, so I > > suspect Cisco has changed something in the new code for CCM5. > > I'll check it out later tonight with Ethereal. In the > > meantime, if you have any other suggestions for things to > > try, I'm certainly open to them > > > > On 4/17/06, Michael Zhang <[EMAIL PROTECTED]> wrote: > > > > > > It's not very clear at this point why neither phone or > > server would do > > > enthentication. With ethereal trace, we can actually see what error > > > messages the phone would get when INVITE is sent out. > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > > Of Gary T. > > > Giesen > > > Sent: Monday, April 17, 2006 4:45 PM > > > To: Michael Zhang > > > Subject: Re: [on-asterisk] Authentication Issues with Cisco Phones > > > with latest SIP firmware > > > > > > I'll steal a switch from work that can do port mirroring > > and provide > > > one later on tonight. Would sip debug output be at all > > useful at this point? > > > > > > On 4/17/06, Michael Zhang <[EMAIL PROTECTED]> wrote: > > > > I believe if you can provide ethereal trace we can get a > > better clue > > > > of what is going on. > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf Of Gary T. > > > > Giesen > > > > Sent: Monday, April 17, 2006 4:39 PM > > > > To: [email protected] > > > > Subject: [on-asterisk] Authentication Issues with Cisco > > Phones with > > > > latest SIP firmware > > > > > > > > sip.conf: > > > > > > > > [5001] > > > > type=friend > > > > username=5001 > > > > authuser=5001 > > > > secret=test > > > > host=dynamic > > > > dtmfmode=rfc2833 > > > > context=intext-inbound > > > > canreinvite=no > > > > nat=yes > > > > qualify=yes > > > > [EMAIL PROTECTED] > > > > > > > > SIP<mac>.cnf: > > > > # Line 1 appearance > > > > line1_name: 5001 > > > > > > > > # Line 1 short name > > > > line1_shortname: "Line 1" > > > > > > > > # Line 1 Registration Authentication > > > > line1_authname: "5001" > > > > > > > > # Line 1 Registration Password > > > > line1_password: "test" > > > > > > > > # Line 2 appearance > > > > line2_name: 5001 > > > > > > > > # Line 2 short name > > > > line2_shortname: "Line 2" > > > > > > > > # Line 2 Registration Authentication > > > > line2_authname: "5001" > > > > > > > > # Line 2 Registration Password > > > > line2_password: "test" > > > > > > > > > > > > Running 8.2 on a 7940... > > > > > > > > PS. Grrr, someone really needs to set the Reply-To to the list > > > > address... > > > > > > > > > > > > On 4/17/06, Nabeel Jafferali <[EMAIL PROTECTED]> wrote: > > > > > My 7960 with SIP 7.5 works fine with Asterisk. Post the > > relevant > > > > > entries of your sip.conf and SIP<MAC>.cnf files to help > > > troubleshoot. > > > > > > > > > > Nabeel > > > > > > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf Of Gary > > > T. > > > > > Giesen > > > > > Sent: April 17, 2006 3:47 PM > > > > > To: [email protected] > > > > > Subject: [on-asterisk] Authentication Issues with Cisco Phones > > > > > with latest SIP firmware > > > > > > > > > > Sorry to drudge up an old issue, but I haven't found a solution > > > > > for this yet. My Cisco phones (7940/60/70) with the latest SIP > > > > > firmware wont authenticate properly with *. They register just > > > > > fine, but when > > > > > > > > I > > > > > > > > > try to actually make a call, I get chan_sip.c:10299 > > > > > handle_request_invite: Failed to authenticate user "5001" > > > > > <sip:[EMAIL PROTECTED]>;tag=000a8a5c671600781097ccc1-7ddc1905 > > > > > > > > > > Based on output from SIP debug, it appears that either > > the phone > > > > > or asterisk is trying to do SIP digest authentication once the > > > > > phone is > > > > > > > > registered, and it's failing. Is there any way to work > > around this > > > > > (either on the phone or asterisk). Right now the only > > workaround > > > > > is to > > > > > > > > > set secret=<blank>, and that's not a viable solution. > > > > > > > > > > Cheers, > > > > > > > > > > Gary > > > > > > > > > > > > ------------------------------------------------------------------ > > > > > -- > > > > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For > > > > > additional > > > > > > > > commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------------- > > > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For > > additional > > > > commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > > > commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] For > > additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
