Another thing you can try is to put a scope on the ATA side which is conncected to the Norstar. Dial the feature or star code from the sip phone and see if you can catch the dtmf waveform. If not, maybe due to the dialplan on the *.
-----Original Message----- From: Henry Coleman [VoIP-PBX.ca] [mailto:[EMAIL PROTECTED] Sent: Thursday, April 20, 2006 7:24 AM To: TAUG - Tech Subject: Re: [on-asterisk] From Nortel to Asterisk Depending on what Norstar it is, the ATA (single line adaptor) may not be capable of inband DTMF (after the call is answered) The best way to check this out is to put a POTS phone on the extension, dial the extension, answer the phone, dial some digits from the originating Norstar phone. If you hear nothing then you will have to look at speech recognition to route the calls. Henry Dominic Ogbonna wrote: >>> I can call Norstar extensions from the IP phone, but not the other >>> way around. > > > Oh ... I'm not sure what your setup is like, but I don't have this > problem. I can call voip phones from nortel stations just fine. If you > bridge from nortel extension => nortel ATA => asterisk, the asterisk > should handle the incoming calls like any other pots line. As far as > the Norstar is concerned, it has just dialed an extension. > > > Dominic > > > ----- Original Message ----- From: "Mark Palser" <[EMAIL PROTECTED]> > To: "Dominic Ogbonna" <[EMAIL PROTECTED]>; <[email protected]> > Sent: Wednesday, April 19, 2006 2:39 PM > Subject: Re: [on-asterisk] From Nortel to Asterisk > > >> I've done the same thing and encountered the same problem, as far as >> I know Norstar does not send DTMF internally, in my situation I can >> call Norstar extensions from the IP phone, but not the other way >> around. If I dial our (external PSTN) number from a Norstar >> extension, then dial the ATA extension, I can call the IP phone. A >> telecom guy told me an ATA expansion card for the Norstar would fix the problem, Jim? >> ----- Original Message ----- From: "Dominic Ogbonna" >> <[EMAIL PROTECTED]> >> To: <[email protected]> >> Sent: Wednesday, April 19, 2006 2:16 PM >> Subject: [on-asterisk] From Nortel to Asterisk >> >> >>> Does anyone have experience integrating an asterisk system into an >>> exisitng Norstar system? Basically, I bridged a norstar extension >>> into an asterisk box, thusly: >>> >>> Norstar extension => nortel ATA =>TDMcard/Asterisk => Voip phone. >>> >>> Everything works great ... except for one thing: I can't get the >>> voip phone to log into the norstar queue, like you would with a >>> regular nortel phone. How do I send feature commands to the Norstar >>> from a voip phone? Any ideas? >>> >>> >>> Dominic >>> >>> -------------------------------------------------------------------- >>> - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional >>> commands, e-mail: [EMAIL PROTECTED] >>> >>> >> >> >> > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
